Yamaha CDX-393MKII Owner's Manual page 17

L Automatic Random Program tape recording
The unit can automatically program tracks in random order for recording to tape.
SYNCHRO
SPACE PEAK
1
4
7
4
–
OUTPUT LEVEL
STOP
1
Follow steps 1 – 4 on page 15.
2
The unit will automatically program tracks for side A and
side B separately considering the tape's total time.
3
Begin recording on the tape deck and at the same time,
press the PLAY button on this unit.
4
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
Notes
• Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining at
the end of the tape also changes accordingly.
• If the tape's length is not enough, not all tracks can be
programmed. In this case, exchange the tape for a longer
one.
• In step 2, you can check the program data for side A and
side B.
OPEN/
DIMMER TIME CLOSE
TAPE CLEAR PROG
2 3
INDEX
+
5 6 I0
8 9 0
2
REPEAT RANDOM
SEARCH
+
SKIP
PAUSE PLAY
3, 4
RANDOM
PROGRAM
A TOTAL
1 2 3 4 5 6 7 8 9 10 11
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that "Pu" appears
between track numbers for side A and side B.
• You can use "CD SYNCHRONIZED RECORDING" if your
tape deck has this function. In step 3 and 4, press the
SYNCHRO button then press the PLAY button on this unit's
remote control transmitter. Recording automatically begins
(for details, refer to page 19.)
12 13 14 15 16 17 18 19 20
17