Yamaha CDX-393MKII Owner's Manual page 10

To advance rapidly
To reverse rapidly
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
1 Elapsed time of the track now playing
2 3 4 5 6 7 8 9 10 11 12
2 Remaining time of the track now playing
REMAIN
2 3 4 5 6 7 8 9 10 11 12
Automatic spacing
If you record a disc onto tape with an insufficient time space
between tracks, the tape deck will not be able to perform blank
search operations on the tape correctly. Such a search mistake
of the deck can be prevented by pressing the auto-SPACE
button to insert spaces of about 4 seconds between the tracks
before recording.
SPACE
10
To advance or reverse play rapidly (MANUAL SEARCH)
SEARCH
(Press and hold.)
SEARCH
(Press and hold.)
SPACE
"SPACE" appears
on the display.
• The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
• Manual search can also be performed while disc play is
paused, though no sound will be heard.
• When using the SKIP/SEARCH button on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.
4 Total remaining time on the disc
2 3 4 5 6 7 8 9 10 11 12
TIME
3 Total disc play time
2 3 4 5 6 7 8 9 10 11 12
Note
The remaining time 2 will not be displayed if the track number
is 25 or higher.
Note
When the automatic spacing function is in effect, the display of
the total time and of the total remaining time will include each
of the 4 second non-recorded intervals placed between tracks.
To cancel the automatic spacing function
SPACE
TOTAL
REMAIN
TOTAL
"SPACE" goes off
from the display.