Appendix; Writing Modes; Disc-At-Once (Dao) - Yamaha CD Recordable/Rewritable Drive CRW2200 Owner's Manual

Appendix

Writing Modes

Disc-at-Once (DAO)

This mode is used when writing a complete disc in a single pass without pausing. Data
cannot be added later, even if the full capacity of the blank disc has not been used.
Example: General CD-ROM
0
Lead-in
Example: Audio CD
0
Audio Audio
Track 1 Track 2 Track 3
Lead-in
Note
The lead-in and lead-out areas signify the beginning and end points of a session. They are not
part of the data but contain information about the session itself. Basically, a session consists of a
lead-in, data, and a lead-out.
Track-at-Once (TAO)
This mode is used when writing data to a disc one track at a time. More tracks can be
added later if there is enough space left on the disc. This is why Track-at-Once mode
is sometimes referred to as Multisession.
0
Data
Track 1
Session 1
Lead-in Lead-out
/Lead-in
Note
Only the first session of a multisession disc can be played back on a conventional audio CD
player. Single session discs can be played back completely.
Data
Track 1
Session 1
Audio Audio Audio
Track 4 Track 5
Session 1
Data Data
Track 2 Track 3
Session 2 Session 3
Lead-out
/Lead-in
Any remaining space
cannot be used
Lead-out
Audio Audio
Track 6 Track 7
Any remaining space
cannot be used
Lead-out
Any remaining space
can be used
Lead-out
34