Yamaha F200 Owner's Manual page 35

vice has activated while the appropriate en-
gine oil quantity is maintained, consult your
Yamaha dealer.
ECM01600
CAUTION:
Do not continue to run the engine if the
low oil pressure warning device has acti-
vated. Serious engine damage will occur.
Overheat warning
If the engine temperature rises too high while
cruising, the overheat warning indicator will
start to blink. The engine speed will automati-
cally decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat warning device has
activated. Check the cooling water inlet for
clogging.
ECM01590
CAUTION:
Do not continue to run the engine if the
G
overheat warning indicator blinks. Seri-
ous engine damage will occur.
Do not continue to operate the engine if
G
a warning device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
Water separator warning
This indicator will blink when water has accu-
mulated in the water separator (fuel filter)
while cruising. In such an event, stop the en-
gine immediately and see page 74 of this
manual to drain the water from the fuel filter.
Get back to the port soon and consult a
Yamaha dealer immediately.
ZMU05421
ZMU05422
Basic components
ZMU05423
ZMU05424
29