Multi-Function Display - Yamaha YZF-R6T(C) Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

3
1. Multi-function display
2. "SELECT" button
3. "RESET" button
The multi-function display is equipped
with the following:
G
a speedometer (which shows the
riding speed)
G
an odometer (which shows the to-
tal distance traveled)
G two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G a clock
G
EAU26920 a self-diagnosis device
G
a display brightness and shift tim-
ing indicator light control mode
NOTE:
G Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
G
To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the "SELECT" button and "RE-
SET" button together for at least
two seconds.
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
If the fuel level warning light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode "F-TRIP" and
start counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the dis-
play between the various tripmeter and
odometer modes in the following order:
F-TRIP → TRIP 1 → TRIP 2 → ODO →
F-TRIP
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
Clock mode
Turn the key to "ON".
To change the display to the clock
mode, push the "SELECT" button for at
least one second.
To change the display back to the prior
mode, push the "SELECT" button.
To set the clock:
1. Push the "SELECT" button and
2. When the hour digits start flashing,
3-6
"RESET" button together for at
least two seconds.
push the "RESET" button to set the
hours.