1. Manuals
  2. Brands
  3. Hubbell Manuals
  4. Telephone
  5. GAI-Tronics 1193
  6. Installation and user manual

Hubbell GAI-Tronics 1193 Installation And User Manual

Voip titan illuminated crossing telephone
Hide thumbs Also See for GAI-Tronics 1193:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and User Guide
Illuminated Crossing Telephone
THESE PRODUCTS MUST BE CONFIGURED PRIOR TO INSTALLATION
Doc. No. GAI-ENG-585
LIFT
1
HANDSET
PRESS
2
BUT T O N
W AIT
3
FOR
ANSW ER
VoIP Titan
(1193 model)
IMPORTANT
PLEASE READ THIS GUIDE FIRST
GAI-TRONICS
A division of Hubbell Ltd.
Press
Issue 1, April 2020.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GAI-Tronics 1193 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hubbell GAI-Tronics 1193

Summary of Contents for Hubbell GAI-Tronics 1193

  • Page 1 ANSW ER Installation and User Guide VoIP Titan Illuminated Crossing Telephone (1193 model) IMPORTANT THESE PRODUCTS MUST BE CONFIGURED PRIOR TO INSTALLATION PLEASE READ THIS GUIDE FIRST GAI-TRONICS A division of Hubbell Ltd. Doc. No. GAI-ENG-585 Issue 1, April 2020.

  • Page 2: Table Of Contents

    CONTENTS Safety and Care Information ............... 3 Features ..................... 3 At a Glance ....................4 Quick Start Guide ..................6 Operation / Testing ..................7 5.1. Illuminated Panel alert ..............7 5.2. Handset integrity alert ..............7 Mounting methods and dimensions ............7 6.1.

  • Page 3: Safety And Care Information

    The safety instructions for these products are contained in a separate document, no 502-20-0171-001, which is included as a paper copy with every individual telephone and is available online from: https://www.hubbell.com/gai-tronics/en/iom-user-guides Features This manual describes the voice over internet protocol (VoIP 1193 version) of the Titan Illuminated Crossing Phone.

  • Page 4: At A Glance

    At a Glance Faceplate Door Handset Illuminated panel Press LIFT HA NDS ET PRESS BUTTON WAIT ANSWER Pushbutton Front view VoIP Titan Illuminated Crossing Telephone.
  • Page 5 Rear view VoIP Titan Illuminated Crossing Telephone.

  • Page 6: Quick Start Guide

    Quick Start Guide Full programming and configuration details are contained in the Configuration guide, available from www.hubbell.com/gai-tronics/en/voip-support The factory defaults will generally be sufficient in most cases, but the following steps must be taken as a minimum: • Provide an Ethernet connection and power (either 24-48Vdc or PoE) •...

  • Page 7: Operation / Testing

    Operation / Testing When the telephone is powered (either by DC supply or PoE) the illuminated panel will be lit, regardless of whether the door is open or closed, or if a call is in progress or not. Lifting the handset will cause dial tone to be heard (if registered with a SIP server) but a call will not be initiated.

  • Page 8: Wall Mounting

    3. Select the appropriate sized gland: Use the smaller gland for cables diameters 4 - 7mm (0.16 – 0.27in). Use the larger gland for cable diameters 8 - 13mm (0.3 – 0.5in). 4. From the outside of the case, insert the selected gland into the threaded cable entry hole and tighten, so that its sealing washer is compressed against...
  • Page 9 WARNING:.An unsafe condition could occur (and your warranty will be invalidated) if :- 1. Any fixing hole made in the rear enclosure is left unused. 2. Any additional holes are drilled into the telephone enclosure. 3. Plastic bushes are not used on all fixing holes. 2.

  • Page 10: Pole Mounting

    6.3. Pole mounting Kit No 100-02-0208-001 This accessory is for mounting GAI-Tronics telephones on to the side of round poles of 100mm to 200mm diameter (4 - 8in), or on to square or rectangular section uprights of 100mm to 150mm (4 – 6in) across the mounting surface.

  • Page 11: Connections And Installation

    Connections and Installation 7.1. General IMPORTANT THIS PRODUCT CAN CONTAIN HAZARDOUS VOLTAGES. IT IS ESSENTIAL THAT THE WATERPROOF SEAL IS PROPERLY MADE DURING INSTALLATION, TO ENSURE THAT WATER CANNOT GET INTO THE ENCLOSURE. THE INGRESS OF WATER CAN CAUSE ACCESSIBLE PARTS OF THE TELEPHONE TO BECOME LIVE, AND THEREFORE MUST BE PREVENTED AT ALL COSTS.

  • Page 12: Important Safety Information

    7.2. IMPORTANT SAFETY INFORMATION Please pay particular attention to the following points if hazardous voltages (>48V) are to be connected to either of the control outputs: The circuits that the relay contacts are connected to must be of the same type, i.e. Both mains or both low voltage. It is not permissible to mix the types of circuit connected to these relays.

  • Page 13: Connections

    disturbance to the wire terminations. As a minimum the cable must withstand a pull of 100N (approx 10kg force or 22.5lbf) without visible movement. If conduit is used, mains cables must be secured elsewhere. Re-fit the faceplate ensuring a weatherproof seal Test the operation of the telephone.
  • Page 14 Output 2 - 3A at 250Vac, 1A at 24Vdc (Note: for Output 1, a continuous current of 2A will cause a 22°C temperature rise to the PCB area close to the terminals after 10mins. This will not cause the telephone to malfunction, but it may result in this area becoming hot especially in high ambient temperatures.

  • Page 15: Legend Panel

    Legend Panel. The telephone is designed to accept a legend panel, giving details of the level crossing. The legend panel slides into a thin slot behind the faceplate and is held in place when the faceplate is secured in the rear enclosure. The legend panel is then backlit by the illuminated panel.

  • Page 16: Fitting The Legend Panel

    Note that the area for printing is 81mm x 66mm and allows a border and a tab for ease of fitting. 8.2. Fitting the legend panel. To fit the legend panel, first ensure that a panel has been correctly printed and cut to size according to the template above.

  • Page 17: Cleaning

    ISO 9001-certified quality control standards throughout the life of the product. We can also supply a full range of accessories including mounting posts, beacons and high-volume sounders. Contact GAI-Tronics for details. https://www.hubbell.com/gai-tronics/en/ VoIP Titan Illuminated Crossing Telephone.

  • Page 18: Technical Specifications

    11. Technical Specifications Product features Power supply Power-over-Ethernet, 802.3af compliant (Class 0) via RJ45, both method A and method B, or External power supply: 24-48Vdc, 200mA. Maximum voltage range: 22-50V Hookswitch Electronic with no external moving parts Ringer loudness 80dBA @ 1m Handset Suitable for inductive coupling to Hearing Aids having a `T' switch position.
  • Page 19 Product features Monitoring and SNMP Reporting Automatic fault reporting Handset integrity monitoring Call Diversion Configurable call lists (max 30 entries) Numbers or URIs Divert to next in list if the call fails Environmental limits Temperature: Operating: -40°C to +60°C (-40°F to 140°F) Storage: -40°C to +70°C (-40°F to 158°F) Relative Humidity Up to 95% (non-condensing)
  • Page 20 Compliance to standards EN 55032 - Electromagnetic compatibility of multimedia equipment - Emission requirements EN 55035 - Electromagnetic compatibility of multimedia equipment - Immunity requirements EN 50121-4 - Railway applications, emission and immunity Federal Communications Commission Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

  • Page 21: Ce Declaration

    12. CE Declaration A copy of the current CE Declaration of Conformity is available from our website. https://www.hubbell.com/gai-tronics/en/product-certificates-uk GAI-TRONICS A division of Hubbell Ltd. Brunel Drive, Stretton Park Burton on Trent, DE13 0BZ England Tel: 01283 500500, Fax: 01283 500400 https://www.hubbell.com/gai-tronics/en/...

Table of Contents