Opening The Device - Graf AquaControl+ User Information

1.11 Temperature and Heat
The operating temperature of the device is defined in the specifications. The device must
not be placed near things which produce heat such as to blowers, heaters, furnaces or
other devices.

1.12 Opening the Device

Disconnect the mains plug before opening the device!
There is a risk of electrical shock when touching the parts inside the device. It is
not permitted to make any changes in the device.
1.13 Cleaning
Do not use any volatile solvents such as alcohol, diluents, gasoline etc. to clean
the device. Only use a dry, clean cloth.
1.14 Unusual Smell
If any unusual smoke or smell occurs, immediately switch off of the device and
remove it from the main power supply! Contact your dealer or the manufacturer.
1.15 Fuses
The replacement of the fuses in the device is only permitted by trained and
authorized technical staff.
The change of the fuses is only allowed when the device is switched off and is re-
moved from the main power supply. Otherwise there is a risk of electric shocks.
The security functions and safety values are mentioned in the manual. The guar-
antee for this equipment will expire in case of using other fuses than those speci-
fied in the manual.
7