Reset Button - XPower AP-2000 Owner's Manual

Control Panel
Circuit Breaker
Power Switch
Pressure Gauge
Circuit Breaker

RESET BUTTON

If the machine stops working, pressing the to could help reset the
machine.
Power Switch
• Turn to "O" position to switch the Air Scrubber OFF. Turn to any speed position to switch
the Air Scrubber ON.
• "II" means the higher speed and "I" means the lower speed.
Preesure Gauge
This measures the negative pressure between the motor inlet and filter outlet. If the
negative pressure exceeds 400 Pascals, it indicates that the filters might have exceeded
the maximum capacity of particles, and the filtration efficiency as well as the airflow
(See Page 8: Filter
have diminished. You should check, clean or replace the filters.
Maintenance)
English - 6