Troubleshooting Guide - XPower AP-2000 Owner's Manual

Troubleshooting Guide

PROBLEM
Air Scrubber does
not start
Unit runs but no
or very low air
movement
The additional
electrical
receptacle has no
power
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
English - 10
POSSIBLE CAUSE
No electricity.
The power cord is not properly
plugged in.
The circuit breaker on the
additional electrical receptacle
(Daisy chain) trips.
Air outlet is blocked.
Filters are fully loaded. The
filter clean/change light
illuminates.
The circuit breaker trips.
SOLUTION
Check for power supply.
Remove and reconnect the
power cord.
Remove all appliances on
the additional electrical
receptacle and press circuit
reset button.
Remove blockage.
Clean or replace the loaded
filters. (See Page 8: Filter
Maintenance)
Press circuit reset button.