Wireless Operation; Switching On/Off The Headphones; Using The Multifunction Button (2) - Silvercrest SBTH 2.1 A1 User Manual And Service Information

SilverCrest SBTH 2.1 A1

Wireless operation

®
Bluetooth technology enables wireless hands-free operation of mobile phones, for
example. These headphones allow you to use a Bluetooth
range of Bluetooth
If your playback device supports the Bluetooth
music wirelessly to your headphones. To be able to remotely control the playback
device with the headphones, it must also support the AVRCP profile.
Depending on the manufacturer, model and software version
of the mobile phone or playback device which is used, the
complete functionality of the headphones cannot be
guaranteed in all cases.

Switching on/off the headphones

Switch the headphones on by sliding the switch (5) to the position
operation). The LED (3) lights up blue for approx. 2 seconds. To switch them off,
slide the switch (5) to the "OFF" position. The LED (3) lights up orange for approx. 2
seconds and then goes out.

Using the multifunction button (2)

The headphones are equipped with a multifunction button (2). To use the various
functions, you can press this button in the initial position
functions by sliding it in the direction of the symbols
52 - English
®
operation is restricted to approx. 10 metres.
All of the following functions depend on the functionality of the
mobile phone or playback device which is used.
®
enabled device. The
®
profile A2DP, you can also transfer
. You can select the other
or
(Bluetooth
.
®