Morso 1000 Swift Instructions For Installation And Use Manual page 4

Minimum clearances to combustible surfaces:
Stove type
Morsø 1000 Swift
uninsulated flue
Morsø 1000 Swift
insulated flue
In situations where the stove is to be fitted into a brick or non-combustible recess, we recom-
mend that the stove is installed with at least 10 - 15 cm clearance to the wall, this will allow
heat to circulate around the stove; also the maintenance of the outside stove is easier. When
applied to masonry, a layer of wallpaper is normally classified as a non-combustible surface.
Material:
Weight:
On the floor
Model no.
Drawingtype: Dimension Skecth
National and Local Building Regulations must again be observed when considering the type, thick-
Location of file:
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
ness and area of the hearth to be used in the installation. Max Hearth temperature under safety test
was 45°C. One should of course always make certain that the underlying floor surface can bear the
weight of the stove.
Distance to furniture and soft furnishings
We recommend that the stove be installed 700 mm from furniture. Serious consideration
should also be given to positioning of any furniture that could be adversely affected by heat.
The clearances to combustible materials in front of the stove should be a minimum of 700
mm. When lit, a wood-burning stove gets hot and therefore adequate protect must be pro-
vided, particularly in situations where there is a safety risk to children or the infirm. A suit-
able safety guard around the stove should be considered.
The stoves handle also gets hot when the stove is lit, which is why a safety glove is in-
cluded with the stove.
4
Behind the stove (A)
300 mm
200 mm
B
Rev. Revisions
Title: Construction:
Afstand til brandbar væg
Released:
Format:
Distance to combustible wall
Scale:
Morsø 1400
Itemno.:
Drawing no.:
To the sides of the
stove (B)
500 mm
550 mm
Sign.: Date:
RSV 03.12.2009
A4
Material:
1:10
Weight:
Model no.
Side 1 of 4
Drawingtype: Dimension Skecth
1400-345 a
Location of file:
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
To soft furnishings
700 mm
700 mm
B
Rev. Revisions
Title: Construction:
Afstand til brandbar væg
Released:
Format:
Distance to combustible wall
Scale:
Morsø 1400
Itemno.:
Drawing no.:
Sign.: Date:
RSV 03.12.2009
A4
1:10
Side 2 of 4
1400-345 a