Advertisement
Quick Links
CAUTION: Contents
are heavy. Exercise
caution and correct lifting
positions when removing
from packaging.
3 B U R N E R , 4 B U R N E R A N D
edge
6 B U R N E R B B Q ' S
GB0100, GB0101 & GB0102
Retain manual for future reference.
Before using the BBQ,
remove any packaging
material within and
around the BBQ
supplied for protection
during transit.
Advertisement
Related Manuals for Matador Edge 3 BNR
Summary of Contents for Matador Edge 3 BNR
- Page 1 CAUTION: Contents Before using the BBQ, are heavy. Exercise remove any packaging caution and correct lifting material within and positions when removing around the BBQ from packaging. supplied for protection during transit. edge 3 B U R N E R , 4 B U R N E R A N D 6 B U R N E R B B Q ’...
- Page 2 Assembly instructions Troubleshooting Technical Information Spare Parts List Warranty CONTACT INFORMATION BARBECUE DIMENSIONS For spare parts, order from your nearest EDGE 3 BNR EDGE 4 BNR EDGE 6 BNR Bunnings Warehouse. For service and GB0100 GB0101 GB0102 warranty queries, please contact...
- Page 3 6 Tool hooks & bottle opener Dual usb ports Robust metal castor wheels Magnetic door latches BARBECUE SPECIFICATIONS EDGE 3 BNR EDGE 4 BNR EDGE 6 BNR SIDE BURNER REAR BURNER TOTAL INPUT TOTAL INPUT TOTAL INPUT TOTAL INPUT TOTAL INPUT ULPG: 45.9 Mj/hr...
- Page 4 • We advise that a fire extinguisher be on hand. parts please have this information at hand. your matador edge barbecue date of purchase..........model number............serial no..............date of manufacture.........
- Page 5 If gas is burning try to not extinguish it, having the gas burn off is better than letting the pressure build up and potentially lead to an explosion. IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULL Y BEFORE USE! UNIVERSAL LPG GAS ONL Y MATADOR INSTRUCTION MANUAL...
- Page 6 Do’s & Don’ts DO’S DON’TS • DO NOT install the barbecue closer than 1 • Use inspected exchanged gas cylinders and/ meter on the sides or 1 meter in the back to or have cylinders filled by an authorised LPG any combustible surface or less than 1 metre supplier in your country.
- Page 7 If the information above is not followed exactly, a CYLINDER VALVE fire causing death or serious injury may occur. BLACK COUPLING NUT BLEED-OFF Turn clockwise to connect VALVE ALWAYS STORE GAS Turn clockwise REGULATOR to reseal CYLINDER IN A WELL VENTILATED AREA MATADOR INSTRUCTION MANUAL...
- Page 8 Positioning the BBQ the side, back and front wall areas shall be and • This BBQ shall only be used in an above ground remain open and unrestricted. open-air situation with natural ventilation, without stagnant areas, where gas leakage and •...
- Page 9 BARBECUES MUST BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER’S INSTALLATION INSTRUCTIONS, LOCAL GAS FITTING REGULATIONS, MUNICIPAL BUILDING CODES AND THE GAS INSTALLATION CODE AS/NZS 5601 MATADOR INSTRUCTION MANUAL...
- Page 10 Gas Leak Test The gas connections on your barbecue were leak tested at the factory before shipment, however a complete leak test must be done during assembly. This leak test must also be conducted every time you connect the regulator to the gas cylinder for safe operation.
- Page 11 In between cooks we suggest applying a light coating Step 2 - Ensure the gas valve on your cylinder is of cooking oil to protect the surfaces and prevent food turned to open. from sticking the next time you cook. MATADOR INSTRUCTION MANUAL...
- Page 12 (see image included). The USB ports provide convenience for below) that is designed to be used with the Matador charging small appliances such as a mobile phone or rotisserie kit. It is essential that you use this extension meat thermometer.
- Page 13 ‘+’ END FACING OUT FROM THE BBQ. STEP 4 - Lift and swing out the burner from its resting place over the valve assembly. STEP 5 - Once cleaned, repeat the above process in reverse to reassemble the barbecue. MATADOR INSTRUCTION MANUAL...
- Page 14 Care & Maintenance Storage The cleaner stainless steel can be kept while in storage or during use, the greater the assurance of • To help maintain your barbecue we recommend using a protective cover (not included). Where optimum corrosion resistance. In order to maintain possible store barbecue under a sheltered area.
- Page 15 STEP - 6 Locate the light housing back into the mounting hole and use the screw secure in place. STEP - 7 Turn on the power to the barbecue and test that the light is now functioning correctly. MATADOR INSTRUCTION MANUAL...
- Page 16 Natural Gas Conversion Your EDGE barbecue has been certified that it can After the installation has been completed, the installer must test that operation of the appliance be converted to a natural gas installation from to ensure it is correctly functioning. ULPG.
- Page 17 Exploded Parts Diagram EDGE 3 BURNER BARBECUE 23/24 MATADOR INSTRUCTION MANUAL...
- Page 18 Exploded Parts Diagram EDGE 4 BURNER BARBECUE 25/26 23/24...
- Page 19 Exploded Parts Diagram EDGE 6 BURNER BARBECUE 25/26 23/24 MATADOR INSTRUCTION MANUAL...
- Page 20 Left Hand Folding Grease Cup Side Shelf AAA Battery (not Grease Tray 1 / 1 Shown) For Technical Assistance and spare parts advice Call Mayo Hardware on (AUS) 1300 360 211 (NZ) 09 415 6240 or email us at matador@mayohardware.com.au...
- Page 21 M6 Hex Nut M4 Hex Nut M4 x 15mm Pan Head Screw 7/16” Collar Nut 6mm Diameter Flat Washer M6 Shoulder Screw M6 x 12mm Flat Head Screw M6 Door Pivot M6 x 16mm Pan Head Screw MATADOR INSTRUCTION MANUAL...
- Page 22 Assembly Instructions Video Instructional Guides It is important to read these instructions thoroughly. If you have any problems, difficulties or concerns To help you assemble your new Edge Barbecue please contact the manufacturer or retailer. videos of the assembly process have been made to step you through the process.
- Page 23 Pay attention to the orientation of the Trolley Shelf (8) to ensure the folded edges are facing down and that the large access hole is on the same side as the access hole in the Rear Panel (7). MATADOR INSTRUCTION MANUAL...
- Page 24 Assembly Instructions Step 2 - Assemble Trolley Side Panels ALL MODELS Parts / Hardware Needed NOTE: This stage will require a Phillips Trolley Left head screwdriver Side Panel Trolley Right Side Panel M6 x 12mm Flat Head Screw 2.1 Screw the Left Hand Side Panel (18) to the Rear Panel and Shelf assembly using 3 M6 x 12mm (J) screws. 2.2 Now assemble the Right Hand Side Panel (19) using the same method...
- Page 25 4 M4 x 15mm Pan Head Screws (E). 3.3 After securing the Power Adaptor (12) feed the power lead through the access hole in the Trolley Rear Panel (7) 3.4 Leave the barbecue assembly upside down for now MATADOR INSTRUCTION MANUAL...
- Page 26 Assembly Instructions Step 4 - Attach Trolley Door Pivots ALL MODELS Parts / Hardware Needed NOTE: This stage will require an Trolley Base Panel adjustable spanner. M6 Door Pivot 4.1 Screw the 2 M6 Door Pivots (L) into the 2 holes located at the front corners of the Trolley Base Panel (10) NOTE: Secure the pivots firmly but do not over tighten them...
- Page 27 5.3 Attach the two remaining Locking Castors (17) to the rear of the Trolley Base Panel (10) 5.4 Turn over the assembly so that it is sitting on its wheels. You may want to lock the rear Castors to help in assembling further components. MATADOR INSTRUCTION MANUAL...
- Page 28 Assembly Instructions Step 6 - Gas cylinder support ALL MODELS Parts / Hardware Needed NOTE: This stage will require an Gas Cylinder adjustable spanner or a 10mm Support spanner and a Phillips head screwdriver M6 Hex Nut M6 x 12mm Flat Head Screw 6.1 Using 1 M6 x 12mm Screw (J) and the M6 Hex Nut (C) secure the 2 Gas Cylinder Supports (16) together so they are at 90 degrees to each other.
- Page 29 7.3 Carefully lift and turn the trolley assembly over so it is now resting on its castors. NOTE: We recommend asking for someone to help you lift and turn over the trolley to avoid injury and damage to the barbecue. MATADOR INSTRUCTION MANUAL...
- Page 30 Assembly Instructions Step 8 - Attach Trolley Door Magnet ALL MODELS Parts / Hardware Needed NOTE: This stage will require an Trolley Door adjustable spanner or a 10mm Magnet spanner and a Phillips head screwdriver M4 Hex Nut M4 x 15 mm Pan Head Screw 8.1 Place the Trolley Door Magnet underneath the Trolley Shelf (8) and feed the magnetic latches through the two openings on the front face of the shelf.
- Page 31 9.2 Secure the Trolley Wire Shelf Assembly (9) to the side of the trolley assembly using 2 M6 x 12mm Screws (J) 9.3 Take 2 more M6 x 12mm Screws (J) and secure the Wire Shelf (9) to the base of the trolley assembly. MATADOR INSTRUCTION MANUAL...
- Page 32 Assembly Instructions Step 10 - Attach the USB Ports 4 BNR and 6 BNR MODELS ONL Y Parts / Hardware Needed NOTE: This stage will require a Phillips USB Port head screwdriver Assembly M6 x 12mm Pan Head Screws 10.1 Locate the USB Port Assembly (11) to the left hand side inside the trolley assembly. 10.2 Use 2 M6 x 12mm Screws (J) to secure to the trolley assembly NOTE: The cables from the USB Ports should be facing the back of the trolley...
- Page 33 NOTE: You must get someone to help you lift the Firebox onto the Trolley to avoid injury and damage to the barbecue. Regulator and light connection wire Hose and Regulator GAS INLET SPECIFICATION (for use with ULPG) 3/8” SAE Flare with 5/8-18 UNF Thread MATADOR INSTRUCTION MANUAL...
- Page 34 Assembly Instructions Step 12 - Secure the Gas Connector Bracket ALL MODELS Hardware Needed NOTE: M6 x 12mm This stage will require a Phillips Pan Head Screws head screwdriver 12.1 Locate the Gas Connector Bracket against the inside of the trolley with the 2 mount holes above the USB Ports.
- Page 35 14.2 Ensure the groove around the side of the seal locates over the edge of the shelf. The seal must be located on both sides of the shelf to ensure it will not fall through or pop up once assembled. MATADOR INSTRUCTION MANUAL...
- Page 36 Assembly Instructions Step 15 - Attach Trolley Doors ALL MODELS Parts / Hardware Needed Trolley Door Left Hand Trolley Door Right Hand 15.1 Start with the Trolley Door Left Hand (6) and locate it onto the Door Pivot (L) protruding from the base of the Trolley Assembly.
- Page 37 16.4 On the front bracket, screw a M6 x 16 mm Screw (M) into the Firebox (4) to finish the attachment. NOTE: Washer must be used in step 16.3 to avoid damaging the enamel coating of the Firebox MATADOR INSTRUCTION MANUAL...
- Page 38 Assembly Instructions Step 17 - Attaching Folding Shelf Brackets 3 BNR MODEL ONL Y Parts / Hardware Needed NOTE: This stage will require a Phillips Pivot Bracket A head screwdriver, adjustible spanner or and a socket set Pivot Bracket B Pay attention to the orientation Domed Hex Nut of the brackets.
- Page 39 • To raise the shelf, pivot the shelf up and drop it back down onto the support brackets so that the locking screws are again engaged again in the top notch details. MATADOR INSTRUCTION MANUAL...
- Page 40 Assembly Instructions Step 19 - Attaching The Side Burner 4 BNR AND 6 BNR MODELS ONL Y Parts / Hardware Needed NOTE: Right Hand Side This stage will require a Phillips Burner Shelf head screwdriver. M4 x 8 mm Pan Head Screw 6 mm Flat Washer M6 x 16 mm...
- Page 41 20.4 Secure the Side Burner Support Bracket (34) to the underside of the shelf. Use 3 M4 x 8 mm Screws (A) Assembly to fix the bracket in place. Screw in place from the top side of the shelf MATADOR INSTRUCTION MANUAL...
- Page 42 Assembly Instructions Step 21 - Attaching Side Burner Injector Bracket 4 BNR and 6 BNR MODELS ONL Y Parts / Hardware Needed NOTE: Side Burner This stage will require a Phillips Injector Bracket head screwdriver 7/16” Collar Nut M4 x 8 mm Pan Head Screw 21.1 Slide the Side Burner Injector Bracket (35) over the end of the injector hose coming out from the Firebox (4).
- Page 43 Assembly Instructions Step 21 - Continued MATADOR INSTRUCTION MANUAL...
- Page 44 Assembly Instructions Step 22 - Install Flame Tamers, Side Burner Trivet and Rear Burner Switch BAttery ALL MODELS (Flame Tamers) 4 BNR and 6 BNR only (TRIVET) Parts / Hardware Needed 3 / 4 / 6 BNR Side Burner 0 / 1 / 1 Trivet 2 / 3 / 4 Flame Tamers...
- Page 45 Your EDGE Barbecue comes supplied with a Grate Tool (36) which is design to help you lift the Cooking Grate (1) from the Firebox (4) when needed for cleaning and maintenance. You must use this tool to avoid damaging the Cooking Grates (1) with other tools. MATADOR INSTRUCTION MANUAL...
- Page 46 Assembly Instructions Step 24 - Insert The Grease Tray and Cup ALL MODELS Parts / Hardware Needed Grease Cup Grease Tray 24.1 The Grease Tray (22) and Grease Cup (21) are removed and inserted from the front of your barbecue for your convenience.
- Page 47 Ensure there is no visible damage to your charge cable Hood Lights will come on Power not connected to barbecue Check the barbecue is connected to the power source and turned on. Globes may need replacing Replace globe in light fitting MATADOR INSTRUCTION MANUAL...
- Page 48 Technical Information 3 Burner Wiring Diagram 230-240V AC Hood Lights Transformer 12V AC Switch Power voltage Knob Lights step-down plate 4 and 6 Burner Wiring Diagram USB Ports 230-240V AC Hood Lights Transformer 12V AC Switch Power voltage Knob Lights step-down plate...
- Page 49 Use only extension cords approved for outdoor use marked with W-A and rated for the power of this appliance MINIMUM CLEARANCE FROM COMBUSTIBLE MATERIALS: From Top of BBQ: 1000mm, From Sides and Rear: 1000mm SERIAL NUMBER: DATE: FOR OUTDOOR USE ONL Y MATADOR INSTRUCTION MANUAL...
- Page 50 EDGE Spare Parts 6BNR BARBECUE PARTS SHOWN FOR REFERENCE 1/65 27/78/79 2/66 7/68 31/83/84 33/85/86 10/69/70 13/73/75 35/87/88 37/89/90 67/121/122 14/74/76 39/91/92 42/93/95 80/81/82 43/94/96 99/100 46/97/98...
- Page 51 Side Burner Lid GB0169 Castor GB0139 Side Burner Trivet GB0170 Locking Castor GB0140 Side Burner Assembly GB0171 Gas Cylinder Base GB0141 Side Burner Shelf Assy GB0172 6B Trolley Bottom Panel Side Burner Ignition GB0142 GB0173 Assembly Needle Assembly MATADOR INSTRUCTION MANUAL...
- Page 52 4B Trolley Back Panel GB0196 Side Burner Connector Nut GB0241 Assembly 3B Trolley Back Panel Side Burner Corrugated GB0197 GB0242 Assembly Pipe 4B Trolley Top Panel GB0198 Matador Badge GB0121 Assembly 3B Trolley Top Panel GB0199 Bottle Opener Hook GB0211 Assembly...
- Page 53 MATADOR WARRANTY Thank you for purchasing one of our quality Matador BBQs. YOUR MATADOR BBQ IS COVERED AGAINST DEFECTS FOR A PERIOD OF 5 YEARS FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT. THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSED BY ABUSE OR NEGLECT.
- Page 54 To make a claim under warranty, take the product (with proof of purchase) to any Bunnings store (see www. bunnings.com.au for store locations) or contact Mayo Hardware Pty Ltd matador@mayohardware.com.au. Mayo Hardware Pty Ltd bears reasonable, direct, expenses of claiming under warranty. You may submit details and proof to Mayo Hardware Pty Ltd for consideration.
- Page 55 Register your BBQ REGISTERING YOUR BBQ FOR WARRANTY We recommend you register your Matador BBQ to make it easier for you in the event that you ever have any warranty claims. To register your warranty please scan the QR CODE below to be taken to our online registration page.
- Page 56 Visit www.matadorbbqs.com.au For technical and warranty support call 1300 360 211 (AUS) 09 415 6240 (NZ) Your purchase receipt will be required for warranty claims. For spares parts contact your local Bunnings Warehouse. PB0150f...