Introduction; What You Need To Get Started - National Instruments GPIB-1284CT Getting Started

Introduction

What You Need to Get Started

© National Instruments Corporation
This chapter lists what you need to get started and optional equipment you
can order, and briefly describes the GPIB-1284CT hardware and the
NI-488.2 software for Windows.
Before you install your GPIB hardware and the NI-488.2 software for
Windows, make sure you have all of the following items:
Windows 3.0 or higher installed on your computer
3.5 or 5.25 in. NI-488.2 Software for Windows. Distribution Disk for
the GPIB-1284CT, which is included in your kit
One of the following boxes, which is included in your kit:
GPIB-1284CT AC version (100–120 VAC)
GPIB-1284CT AC version (220–240 VAC)
GPIB-1284CT DC version
If you have the GPIB-1284CT AC version, one of the following power
cords:
U.S. standard power cord
Swiss power cord
Australian power cord
Universal European power cord
North American power cord
U.K. power cord
If you have the GPIB-1284CT DC version, one of the following:
9 V wall-mount power supply (100–120 VAC)
9 V wall-mount power supply (220–240 VAC)
External keyboard connector DC power cable
1-1
1
GPIB-1284CT for Windows