Subscribe to Our Youtube Channel
Related Manuals for Dutypoint MiniBreak
Summary of Contents for Dutypoint MiniBreak
- Page 1 MiniBreak CAT 5 tank and booster set Date 17/09/19 - Revision A Operating and maintenance instructions DOC-MBOM1901...
- Page 2 Handling, transportation and installation of this equipment should only take place with the proper use of lifting equipment. This product must be stored in a dry, frost-free environment. Noise Emissions This equipment operates at a noise level lower than 70dBA. Protection degree IP54 ENQUIRIES@DUTYPOINT.COM | 01452 300110 01452 300110 SALES@DUTYPOINT.COM...
-
Page 3: Installation
Installation The Dutypoint MiniBreak tank booster set is despatched mounted on a wooden pallet and covered in a protective film, it is recommended that the unit be retained in the protective packaging until the product is to be installed. The unit will arrive pre-packaged and wired ready for installation. -
Page 4: Operation
The electrical cable can now be removed from the pump terminal box. System The new pump can now be fitted reversing the above procedure. connection ENQUIRIES@DUTYPOINT.COM | 01452 300110 15mm push fit Gland for wiring to volt free contact NOTE 01452 300110 SALES@DUTYPOINT.COM... - Page 5 The electrical cable can now be removed from the pump terminal box. The new pump can now be fitted reversing the above procedure. ENQUIRIES@DUTYPOINT.COM | 01452 300110 01452 300110 SALES@DUTYPOINT.COM...
-
Page 6: Dimensional Drawing
Specifi cation Model Power Input Current Single-phase MBI-35M 0.37 2.5A H metres 23.5 Q = Flow Rate H = Total manometric head HS = Suction height Tolerance of charactic curves in compliance with EN ISO 9906 App A. 01452 300110 SALES@DUTYPOINT.COM... - Page 7 2006/42/EC: Machinery Directive • 2014/30/EU: Electromagnetic Compatibility Directive Hereby declare that the equipment: Description Dutypoint Cat 5 tank & pumpset Product Range MiniBreak Is in conformity with the applicable requirements of the following documents: • EN 809:1998+A1:2009: Pumps and pump units for liquids - Common safety requirements •...
- Page 8 Leaking ball valve Break tank overflowing Replace/clean non-return valve in Non-return valve letting by the pump controller Pump stops and pressure Replace non-return valve Non-return valve letting by drops immediately in pump controller unit 01452 300110 SALES@DUTYPOINT.COM ENQUIRIES@DUTYPOINT.COM | 01452 300110...
- Page 9 Dutypoint Limited Shepherd Road Gloucester GL2 5EL United Kingdom T: +44(0)1452 300592 W: www.dutypoint.com...
Need help?
Do you have a question about the MiniBreak and is the answer not in the manual?
Questions and answers