Repeating Defects - Xerox Phaser 5550 User Manual

Repeating Defects

Marks or voids are regularly repeated on the page. Use the following table to determine the
supply that needs replacing.
Defect Spacing
44 mm (1.73 in.)
56.5 mm (2.22 in.)
58.7 mm (2.31 in.)
94.2 mm (3.72 in.)
94.2 mm (3.72 in.)
Different supplies may create print defects with similar measurements. To identify the faulty
supply:
1. Replace the drum cartridge (do not discard the packaging).
2. If the problem continues:
a. Remove and repackage the new drum cartridge.
b.
Reinstall the original drum cartridge.
c. Replace the maintenance kit (fuser and transfer roller).
3.
If the problem continues, contact your Customer Support Center.
To order Xerox supplies, contact your local reseller or go to
5550supplies.
Supply to Replace
drum cartridge
drum cartridge
transfer roller
drum cartridge
fuser
Phaser® 5550 Printer
6-68
Print-Quality Problems
www.xerox.com/office/