Table of Contents
Advertisement
www.weg.net
ATTENTION!
Return to the SEt menu if you want to store the changes you made in the Setting menu. The storage procedure is activated
in this menu. See Save Procedure. Device restarts if you store the changes.
3.5.2 Saving
Press the left key until you see the "SAU nO" display to confirm or discard the changes you made.
To confirm the changes:
Press the right key to blink the "nO" sign. Use the up/down keys to change the "nO" to "YES".
Then, press the left key to store the changes.
To discard the changes:
Press the right key to blink the "nO" sign. Then exit the menu using the left key without saving
your changes.
20 | Electronic Multimeter - MMW03-CH
Advertisement
Table of Contents
