ViewSonic ViewBoard IFP70 Series Quick Start Manual page 12

USB and Networking Connec�ons
Just like any PC, it is easy to connect various USB devices and other peripherals to your ViewBoard.
USB Peripherals
Plug the USB device cable into the USB port.
Networking and Modem cables
Plug the router cable into the LAN port.
USB
LAN
Media Player (Audio and Video) Connec�on
To connect to a media player:
1. Connect the HDMI cable to the HDMI ports on your ViewBoard and peripheral device.
2. Plug in the power cord of your ViewBoard, and turn on the rear-panel power supply switch.
3. Press the Power bu�on on the right-hand side of the ViewBoard to turn the screen on.
4. Press the INPUT bu�on on the remote control and switch to the "HDMI" input source.
HDMI
USB cable
Network cable
HDMI cable
USB device
Router and other
network signal output
Projector