Download Print this page
Balanced Body Wall Tower How To Assemble

Balanced Body Wall Tower How To Assemble

Advertisement

Quick Links

How to Assemble Your Wall Tower
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
400-124 | 06.29.18

Advertisement

loading
Need help?

Need help?

Do you have a question about the Wall Tower and is the answer not in the manual?

Questions and answers

Summary of Contents for Balanced Body Wall Tower

  • Page 1 How to Assemble Your Wall Tower Contact Us 1-800-PILATES | +1-916-388-2838 pilates.com | info@pilates.com 400-124 | 06.29.18...
  • Page 2 Please read through these instructions completely prior to assembling your Wall Tower. You will need a slot-head screwdriver and a crescent or socket wrench. You will also need to acquire ALIGN THE TUBE OPENINGS ON THE FLOOR the proper hardware for mounting the equipment to the wall.
  • Page 3 ATTACH TUBES TO CURVED TOP PIECE SECURE THE WALL TOWER TO THE WALL Slide the Pole System tubes The curved top piece is into the curved Pole System designed to screw into the top. With the tubes properly studs at standard 16” spacing.
  • Page 4 When not in use, the push-through bar should be secured out become loose, such as the eyebolts where the springs attach. of the way. You can use the safety strap or the Wall Tower chain (see the photos below). Attach the safety strap by looping the strap around the top end tube and through the sewn end loop.