Introduction; About This Guide; Conventions - Xerox DocuPrint 155 Operation Manual

About this guide

Contents

Conventions

NPS/IPS Extension Operations Guide

Introduction

This document provides all the information you need to install,
set up, and operate the NPS/IPS Extension option on the
DocuPrint 100/115/135/155/180 EPS. It also describes the
procedure for switching between operating modes and provides
troubleshooting information. This document is intended for the
site system administrator who is responsible for installing and
setting up the NPS/IPS Extension option, and for the operator or
Trusted User, who is responsible for the day-to-day operations.
Before using this documentation, become familiar with its
contents and conventions.
This guide contains the following:
• Chapter 1, "Product overview," provides detailed
explanations of the NPS/IPS Extension option.
• Chapter 2, "Installation planning," gives you the information
that you need to prepare for installation of the NPS/IPS
Extension software.
• Chapter 3, "Changing print modes," provides procedures for
switching between EPS, and NPS/IPS operating systems.
• Chapter 4, "Problem solving," provides troubleshooting
information about switching between print modes.
An index is provided at the end of this document.
This guide uses the following conventions:
xiii