Components Of The Nps/Ips Extension - Xerox DocuPrint 155 Operation Manual

Product overview

Components of the NPS/IPS Extension

1-6
The NPS/IPS Extension option consists of the following system
components, which are added to the base DocuPrint 100/115/
135/155/180 EPS configuration:
• 9.1 gigabyte (GB) or larger external fixed disk drive
• 1 meter SCSI cable
• AC power cord
• NPS/IPS version 7.4.1 software or higher
The external fixed disk drive is located under the quarter-inch
cartridge (QIC) tape drive within the controller stand, and is
connected to the processor through the SCSI cable. This
external disk drive requires a separate AC power source.
Figure 1-3. Controller with external fixed disk drive
1. External fixed disk drive
NOTE: Your system may have a controller and stand that are
different from the ones pictured above. The external disk drive
may be placed in either the right or left compartment of the
stand.
NPS/IPS Extension Operations Guide