Changing Print Modes; Changing From Eps Print Mode To Nps/Ips Print Mode - Xerox DocuPrint 155 Operation Manual

Changing from EPS print mode to NPS/IPS print mode

NPS/IPS Extension Operations Guide
3.

Changing print modes

This chapter provides information on switching between the
various print modes of the printing system.
NOTE: You must be logged in the system as either a Trusted
User or Administrator to switch from EPS to NPS/IPS mode.
Use the following procedure to change operating modes of the
printing system from EPS mode to NPS/IPS mode.
1. On the DocuSP Print Services window, click the Queue
Manager icon. The Queue Manager window opens.
2. In the Queue Manager window, hold all queues by
performing the following:
a. Right-click in the queue list area, and select [Select All]
from the pop-up menu.
b. Right-click again in the queue list area, and select [Do Not
Accept Jobs] from the pop-up menu.
c. Display the pop-up menu again, and select [Do Not
Release Jobs].
3-1