Deployment Steps - Xerox Scan to PC Desktop v9.0 Network Installation Manual

Software components and their installers for the Professional Edition:
Software component
1 Installscript engine
2 PaperPort Professional 11
3 OmniPage Professional 15
4 PDF Converter Professional 4
5 Image Retriever 7 Pro
6 PaperPort Image Printer

Deployment steps

Please follow the instructions below to install the components of Scan to PC Desktop
appropriately.
If the installer of any software component supports more than one UI languages, and a non-
English installation is needed, one of the language transform files must also be specified in the
command-line (Presented as
installation, use the following transforms tag:
Note: To read more about Windows Language Codes for the language transform files, see the chapter "Creating
administrative images".
1. To install the Installscript engine for any software component, use the following
command-line:
MSIEXEC /i ISSCRIPT10.msi
2. To install PaperPort Professional 11, use the following command-line:
MSIEXEC /i "ScanSoft PaperPort 11.msi" ALLUSERS=2
TRANSFORMS=<LANG-TRFILE.mst>
3. To install PaperPort 11 SE, use the following command-line:
MSIEXEC /i "ScanSoft PaperPort 11.msi" ALLUSERS=2
TRANSFORMS=<LANG-TRFILE.mst>
4. To install OmniPage Professional 15, use the following command-line:
MSIEXEC /i "ScanSoft OmniPage 15.msi" ALLUSERS=2
TRANSFORMS=<LANG-TRFILE.mst>
5. To install the OmniPage SE 4, use the following command-line:
MSIEXEC /i "ScanSoft OmniPage SE 4.msi" ALLUSERS=2
TRANSFORMS=<LANG-TRFILE.mst>
6. To install Image Retriever 7 Pro or Image Retriever 7 SE use the following command-
line:
MSIEXEC /i "Image Retriever 7.msi" ALLUSERS=2
TRANSFORMS=<LANG-TRFILE.mst>
where the optional
customize Image Retriever at its install time. The following installer properties
can be used for this purpose:
<LANG-TRFILE.mst>
/qn
<other_IR_install_params>
14 of 16
Installer
ISSCRIPT10.msi
ScanSoft PaperPort 11.msi
ScanSoft OmniPage 15.msi
ScanSoft PDF Professional 4.msi
Image Retriever 7.msi
PaperPort Image Printer.msi
below). For example, to specify a German
TRANSFORMS="1031.mst"
/qn
/qn
/qn
/qn
[<other_IR_install_params>] /qn
parameters can be used to