Table of Contents
Advertisement
TABLE A-2
Requirement
15.
Is a minimum 545 mm (21.5 inches) usable internal depth in the
rack to allow space for connector housings, cabling, and the
motherboard handles?
16.
Is the rack bolted to the floor, adjacent frames, or both?
NOTE: Free-standing racks with a footprint of less than 600mm x 600 mm (23.6 inches x 23.6 inches) are likely to be
unstable and should be treated with caution.
17.
Are the proper tools available for performing the installation
(Phillips No.2 screwdriver, flat bladed screwdriver, utility knife,
torque driver – refer to the Netra ft 1800 Hardware Installation
Manual)?
1. Describe incomplete items in
46
Netra ft 1800 Site Planning Guide • February 2000
Physical Requirements (Continued)
TABLE A-11
on page 53.
Page
Not
ref.
YES
NO
Complete
30
30
2
1
Advertisement
Table of Contents
