Xerox EX7750 Printing Manual page 105

A
A-11 Print Options
Option and settings
(default setting is underlined)
Save Fast Reprint
Off/On/RIP only
Screen Switching
On/Off
Secure Print
Slip Sheet
On/Off
Slip Sheet Paper Source
Tray 1 (MPT)/Tray 2/
Tray 3/Tray 4/
Tray 4 (High Capacity)/Tray 5/
Tray 5 (High Capacity)
Description
Specify whether to save a job's raster data
to disk after printing, so the data will be
available later for reprinting (without
reRIPping).
If you choose Off, all objects on page will
use a low-frequency screen.
If you choose On, text will use a high-
frequency screen and graphics and image
objects will use a low-frequency screen.
Assign a password to the job for secure
printing. Your job is held at the EX7750.
To print your job, enter the password at
the Control Panel on the EX7750.
Specify whether to insert a slip sheet
between copies of multiple-copy jobs.
Specify the paper tray to use for the
slip sheet.
Requirements, constraints,
and information
With this option set to On, all print
option settings remain with the saved
raster data each time the job is reprinted.
To print the job with new print option
settings, you must remove the raster data
and reRIP the job.
This option is not available in the PCL
printer driver.
This option is not supported for PCL.
This option field has a 10-character limit.
This option is not available in the PCL
printer driver.