Xerox EX7750 Printing Manual page 100

A
A-6 Print Options
Option and settings
(default setting is underlined)
Combine Separations
Printer's default/Off/On
Copier Mode
Printer's default/Photo/Map
Copies
1-999
Create Master
None/1-15
Creep Adjustments
Off/Normal/Thick
Duplex
Off/Long Edge Binding/Short Edge
Binding
Description
When printing separations from
supported desktop publishing
applications:
Select On to combine separations on a
single page.
Select Off to view separations as four
individual black-and-white pages,
each representing one color plate.
Specific modes produce optimum
results with certain files. Choose the
mode best suited for your job:
Photo works best if the file is a
photograph.
Map works best with text or data with
thin lines.
Specify the number of copies of the job
to print.
To create a FreeForm master from this
job, specify a number to assign to the
FreeForm master file.
Use this option to adjust images that may
shift from the center of the sheet in
booklet print jobs.
Select Off for simplex (single-sided)
printing.
Select Short Edge Binding for duplex
(double-sided) printing with both sides
using the same top edge.
Select Long Edge Binding for duplex
printing with the back side upside down
Requirements, constraints,
and information
The Printer's default setting reflects the
setting specified in EX7750 Setup.
This option is not available for PCL
printing.
For more information, see the
Color Guide.
This option is not available in the PCL
printer driver.
Do not enter a value greater than 999.
For more information, see page
Command WorkStation/Command
WorkStation LE allows you to select up
to 100 FreeForm Masters.
This option is not supported for PCL.
Creep can occur when booklet jobs have
a large number of pages or when booklet
jobs are printed on thick media. For more
information, see page A-15.
This option is not supported for PCL.
The Duplex unit must be installed.
For more information on duplex
printing, see page A-15.
5-2.