Technical Features; Default Values; Audible Signals; Visual Signals - CAMDEN inVISION CV-500PPK-V.2 Installation Instructions Manual

Technical Features

Input Voltage
Output
Anti-Triggering Contact
Card
PIN Code
Master Code
Input
Keyboard
Distance between the
second reader and the
CV-500PPK-V.2
Warning:
Do not use a switching power supply because of radiation interference, which may disturb the reading of the badges.

Default Values

Master Code:
Relay time release:
Key-in keypad:
Alarm:

Audible Signals

1 beep (long)
2 beeps (long)
4 beeps (short)
6 beeps (long)

Visual Signals

LED Color
Green
Green flashing
Red
Red flashing
Orange flashing
Request-to-exit
The request-to-exit push button PB1 operates relay RL1.
The LED turns green when the relay is activated.
12 V AC/DC
2 relay outputs, N/O & N/C contact 3 A @ 125 V
500 mA 50 V AC/DC
500 programmable cards or badges
500 programmable codes, 4-digit PIN code
6-digit programmable code
1 request-to-exit
12-digit keypad with built-in buzzer (audible signal)
Minimum 24 inches (60 cm)
Maximum 165 feet (50 meters)
(cable minimum requirement is 7 conductor 22 AWG)
000000
1 second
10 seconds
OFF
Validation of data in programming mode: master code, master card, user card or time delay.
Or authorized access card or Pin code.
Unauthorized access.
Incorrect mode, user number, time entered, data error.
Entering in programming mode.
Or exiting from the programming mode.
Door relay activated
Alarm relay activated
Proximity badge validated
Stand-by
5502 Timberlea Blvd.,
Mississauga, ON Canada L4W 2T7
CV-500PPK-V.2
Normal Mode
www.camdencontrols.com
Toll Free: 1.877.226.3369
Installation Instructions
Programming Mode
Code/Badge position empty
Data computing validated
Code/Badge position busy
Data computing error
File: CV-500PPK-V.2_NF-Man_Rev1.doc
Revised: March 8, 2011
Part No.: 40-82B131