Installation; Connecting Your Lcd Monitor To A Computer; Method 1: Analog (D-Sub) Connection - Xerox XA7 SERIES User Manual

Connecting Your LCD Monitor to a Computer

Method 1: Analog (D-SUB) Connection

Xerox© LCD Monitor User's Manual

2 Installation

Refer to the owner's manual of the computer for connections.
In the process of connecting external equipment, do not connect
any AC power cords to wall outlets until all other connections
are completed.
1
Turn off the computer and unplug the power cable.
2
Fit the DVI-I to D-SUB adapter onto the signal cable of the
LCD monitor.
3
Connect the signal cable to the D-SUB port on the back of
the computer.
4
Connect the AC power cable to the power socket on the
back of the monitor.
5
Plug the computer and monitor power cables into a nearby
outlet.
6
Press the POWER/
monitor to turn the monitor on, then turn the computer on. If
the monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
Connect to
4 5
wall outlet
button on the front panel of the LCD
Attach the
2
DVI-I to
D-SUB
adapter
3 Connect to the D-SUB port
Installation
11