Deleting The Registered Nodes And Rooms; The Dg-Id Feature To Access The Wires-X Node Station - Yaesu FTM-300DR Instruction Manual

Deleting the registered nodes and rooms

Nodes and rooms registered in the 5 categories can be deleted.
1. Press and hold the [F(SETUP)] key  [WIRES-X]  [4 REMOVE ROOM/NODE]
2. Rotate the DIAL to select the desired category, then
press the DIAL knob.
3. Rotate the DIAL to select the node or room to delete,
then press the DIAL knob.
The confirmation message appears.
4. Rotate the DIAL knob to select [OK], then press the DIAL knob.
Deletes the selected node or room.
5. Press the [DISP] key or PTT switch to return to normal operation.

The DG-ID feature to access the WIRES-X node station

Set the WIRES-X, DG-ID number used when connecting to the local node station by
pressing the [D X] key.
1. Press and hold the [F(SETUP)] key  [WIRES-X]  [5 DG-ID]
2. Rotate the DIAL knob to select the DG-ID setting for
WIRES-X.
AUTO: Only open nodes, set to the DG-ID number
"00" may be connected.
01 to 99: Only nodes matching the set DG-ID number
may be connected.
The default setting is "AUTO".
3. Press the [DISP] key or PTT switch to complete the setting.
30
WIRES-X
3 REMOVE ROOM/NODE
TOKYO
1
FISHING
2
3
4
WIRES-X
C1 TOKYO
CQ-JAPAN
JA1YOE-TKY-ROOM
WIRES-X
AUTO
2 SEARCH SETUP
3 EDIT CATEGORYTAG >
4 REMOVE ROOM/NODE >
5 DG-ID
>
>
>
>