Telim (Message Type N) - Bosch Conettix D6600 Manual

Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | 3.0 Computer Communication
Protocols
Figure 24: Message sent to printer
MM/DDsHH:MMsLxxsSFKsACCTsAAAA
+++ACCTsAAAAsALARM_ZNs1
+++ACCTsAAAAsALARM_ZNs2
+++ACCTsAAAAsALARM_ZNs3
+++ACCTsAAAAsALARM_ZNs4
+++ACCTsAAAAsALARM_ZNs5
+++ACCTsAAAAsALARM_ZNs7
+++ACCTsAAAAsALARM_ZNs8
+++ACCTsAAAAsALARM_ZNs9
Table 86: Silent Knight FSK80 Printer/LCD output
Characters Description
MM/DDsHH:M Date and time.
M
SFK SFSK80 format.
Lxx Line number.
AAAA The communicator's account number has four digits.
s Space.

3.2.27 Telim (Message Type n)

Telim Example SIA Mode Description
<LF><CRC><n><sequence#><receiver#><line#>[#aaaaaa|EETTZZZZZZZZZZZZZZZZZZ]<CR>
Table 87: Telim (Message Type n) Byte Description
Title
LF
CRC
Message Type
sequence#
receiver#
line#
(Line/Group #)
account #
EETTZZZZZZZZZZZZZZZZ
ZZ
72 Bosch Security Systems, Inc. | 2012.09 | 4998122703-05
Description
Standard line feed character.
Cyclical redundancy check number.
n
The message sequence number. The valid sequence number range is
0001 to 9999.
The receiver gateway that sent the message. Valid digits: 01 to 99 for
D6600/D6100/D6100IPv6.
The line number of the line in the receiver gateway that sent the
message. Valid digits: 00 to 99. The receiver uses Line 0 (zero) for
internal messages.
The communicator's account number has up to six digits.
The event type and input line number.