JBL simply cinema SUB350 Preliminary Service Manual page 13

Test Tone
Remote Control
Power Sleep
Mute
Open
Volume
CD – +
AM/FM
CD Random
TV
AM/FM Repeat
Aux
TV Auto Tune
Surround
Tape/Aux Stereo/Mono
– +
Rear
Calibrate
Tone –
Speakers
TM
Surround Mode
For proper Dolby Pro Logic
operation, a test tone
Aux
is used to calibrate the
volume settings of the
Surround
speakers. A noise will be
– +
Tone Calibrate
THE SOURCE
Using the remote control, used to calibrate the
push "Tone." Then adjust performance of the system.
the Center and Surround When listening to an actual
levels until the volume recording, the volume level
of all the speakers is the of the surround channels is
same during the test. generally much lower than
Note: The test tone is that of the front channels.
The Source
Power
Volume
Skip
Search
Tune
Bass + – Treble + Tuner Presets
Auto Add
Delete
heard cycling, in order,
from the front left, center,
right, and both surround
speakers.
In fact, when listening to a
movie, virtually all of the
dialogue and a substantial
number of the effects are
reproduced through the
center channel.
Balance
Surround
– +
Calibrate
REMOTE
Push "Calibrate" on the
remote control until
"Balance" appears in the
display.
Center-Channel Volume
Surround
– +
Calibrate
REMOTE
Push "Calibrate" on the
remote control until "Center"
appears in the display and
the corresponding LED on
top of the display is lit.
Rear-Channel Volume
Surround
– +
Calibrate
REMOTE
Push "Calibrate" on the
remote control until "Rear"
appears in the display and
the corresponding LED on
top of the display is lit.
– 16 –
Surround Surround
– +
Calibrate Calibrate
REMOTE
REMOTE
Push "+" on the remote Push "–" on the remote
control to adjust the balance control to adjust the
toward the right speaker. balance toward the left
speaker.
Surround Surround
– +
Calibrate Calibrate
REMOTE REMOTE
Push "+" on the remote Push "–" on the remote
control to increase the control to decrease the
volume of the center volume of the center channel.
channel.
Surround
Surround
– +
Calibrate Calibrate
REMOTE REMOTE
Push "+" on the remote Push "–" on the remote
control to increase control to decrease the
the volume of the rear volume of the rear channels.
channels.
– +
– +
– +
12