JBL EON PowerSub G2 User Manual
  1. Manuals
  2. Brands
  3. JBL Manuals
  4. Subwoofer
  5. EON PowerSub G2
  6. User manual

JBL EON PowerSub G2 User Manual

Jbl powered subwoofer user's guide eon powersub g2
Hide thumbs
Table of Contents

Advertisement

Quick Links

EON Sub G2 User's Guide
Part Number: 981-00059-00 Rev. A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EON PowerSub G2 and is the answer not in the manual?

Questions and answers

Related Manuals for JBL EON PowerSub G2

Summary of Contents for JBL EON PowerSub G2

  • Page 1 EON Sub G2 User’s Guide Part Number: 981-00059-00 Rev. A...

  • Page 2: Table Of Contents

    Stereo EON Mid / High System with EON Sub G2s ...9 Mono Subwoofer ...10 Powered Sub with Passive Mid / High ...11 Voltage Selection And Fuses ...12 Changing Voltage...12 Fuse Replacement ...12 Troubleshooting ...12 JBL Limited Warranty...14 JBL Professional Contact Information ...15 Contents...

  • Page 3: Package Contents

    This User Guide contains important information that will help you get the most from your JBL EON loudspeakers so please take a moment to read it and be sure to keep it in a safe place for future reference.

  • Page 4: Stand Mounting And Precautions

    The driver suspension will prematurely dry out and finished surfaces will be degraded by long-term exposure to intense ultra-violet (UV) light. • The EON Sub G2 contains no user serviceable parts. Refer servicing to an authorized JBL service agency. Stand Mounting and Precautions Your EON speakers include a 35mm receptacle cup to facilitate mounting on tripod stands.

  • Page 5: About The Eon Sub G2

    About the EON SUB G2 Applications To supplement or extend the low frequency output of powered and non-powered full-range speaker systems. Features • 15˝ Differential Drive efficiency, and light weight. • 250 watts actual power delivered to the drivers. • Balanced loop-through output.

  • Page 6: Controls And Connections

    This means that a positive voltage on pin 2 of the LINE LEVEL INPUT will cause the speaker cone to move inward/backward. SIGNAL The SIGNAL LED illuminates to indicate that an audio signal is present at the LINE LEVEL INPUT or the SPEAKER LEVEL INPUT.

  • Page 7: Block Diagram

    And contemporary dance music may rely even more on low frequencies for its power and energy. To meet this need, speaker designers developed specialized speakers called subwoofers. Subwoofers are intended to work below 150 Hz. In fact, most subwoofers will sound downright bad if you try to use them to reproduce sound above 200 Hz.

  • Page 8: Application Examples

    This is a system in which a pair of EON Subs are used with a pair of EON 2-way powered speakers. LOOP 2 & 3 LINE R-PEAK G-SIGNAL 2 & 3 LINE LEVEL LOOP THRU PEAK VOLUME POLARITY Norm SIGNAL SPEAKER LEVEL LOOP 2 & 3 LINE R-PEAK G-SIGNAL 2 & 3 LINE LEVEL LOOP THRU PEAK VOLUME POLARITY Norm...

  • Page 9: Mono Subwoofer

    Mono Subwoofer Here’s a slightly more advanced set-up in which the subwoofers are not driven from the same mixer output as the 2-way main speakers. Using the subwoofers in mono will not degrade the stereo image because the ear does not do a good job of determining the source location of low fre- quency sound.

  • Page 10: Powered Sub With Passive Mid / High

    Powered Sub with Passive Mid / High The SPEAKER LEVEL INPUT on your EON Sub G2 provides a simple and convenient way to add subwoofers to a system with passive 2-way speakers. THRU THRU...

  • Page 11: Voltage Selection And Fuses

    In the event that you do need to change the voltage: • Make sure that the AC is disconnected from the speaker. • Directly below the male IEC connector on the speaker is a voltage selector. Break the factory- applied seal.
  • Page 12 Signal sounds distorted even Mixer or other source is overdriven at moderate volumes, PEAK light is not lit. Hum or Buzz that increases Improper A/C ground or faulty or decreases when the mixer equipment connected to mixer level controls are moved. input Faulty cable between source equipment and mixer...

  • Page 13: Jbl Limited Warranty

    Service Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818- 893-8411). We may direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair. Either way, you’ll need to present the original bill of sale to establish the date of purchase.

  • Page 15: Jbl Professional Contact Information

    JBL PROFESSIONAL CONTACT INFORMATION Mailing Address 8500 Balboa Blvd. Northridge California 91329 Customer Service Monday through Friday 8:00am - 5:00pm Pacific Coast Time In the U.S.A. (800) 8JBLPRO (800.852.5776) On the World Wide Web www.jblpro.com.

This manual is also suitable for:

Eon sub g2

Table of Contents