Samsung AC RNNDKG Series Installation Manual page 17

3 Insert both sides of core wire of the power cable into
the connection sleeve.
• Method 1: Push the core wire into the sleeve from
both sides.
• Method 2: Twist the wire cores together and push it
into the sleeve.
Method 1
Connection sleeve
4 Using a crimping tool, compress the two points and
flip it over and compress another two points in the
same location.
• The compression dimension should be 8.0.
• After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1
Compress it 4 times.
5 mm
5 Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Three or more layers of insulation are required.
Method 1
Insulation tape
40 mm
CAC R-32_Mini 4way_IM_DB68-08129A-00_EN_20181115.indd 17
6 Apply heat to the contraction tube to contract it.
7 After tube contraction work is completed, wrap it with
Method 2
Connection sleeve
• Make sure that the connection parts are not exposed
• Be sure to use insulation tape and a contraction tube
Compression
dimension
• In case of extending the electric wire, please DO NOT
Method 2
Compress it 4 times.
5 mm
Method 2
Insulation tape
35 mm
Contraction tube
the insulation tape to finish.
Insulation tape
CAUTION
to outside.
made of approved reinforced insulating materials that
have the same level of withstand voltage with the
power cable. (Comply with the local regulations on
extensions.)
WARNING
use a round-shaped Pressing socket.
– Incomplete wire connections can cause electric
shock or a fire.
17
English
2018/11/15 13:49:30