Silvercrest SDB 2400 A1 Operating Instructions Manual page 67

TIPS
► The iron takes longer to cool down than to heat up. Therefore, fi rst iron
delicate fabrics at lower temperature settings.
► With mixed fabrics, always set the temperature for the more sensitive fi bre.
3) Adjust the steam regulator
4) Select the best suitable temperature setting with the temperature regulator
The control lamp "Temperature" 4 glows.
5) When the set temperature has been reached, the control lamp "Tempera-
ture" 4 goes out. Wait until the control lamp "Temperature" 4 goes out.
NOTICE
► To help with ironing severely wrinkled or very dry materials, you can dampen
them by using the fi ne water spray 2
6) You can now start ironing.
Steam ironing
The temperature regulator 7 must be at least at level
Otherwise it cannot produce any steam.
1) Set the steam regulator
2) Wait until the control lamp "Temperature"
3) You can now start ironing.
Ironing with steam blast
The steam blast is especially suitable for smoothing diffi cult to reach parts of a
garment.
The temperature regulator 7 must be in the red marked setting range
least in order to produce a steam blast.
1) Slightly raise the steam iron..
2) Press the steam blast button
SDB 2400 A1
1 to
.
button.
1 to the desired steam setting.
4 goes out.
3
7.
or higher.
at the
65
GB
MT