Ingersoll-Rand 290 Series Product Information page 3

Product Saf�ty Information
Int�nd�d Us�:
T��s� Air Impact �r�nc��s ar� d�sign�d to r�mov� and install t�r�ad�d fast�n�rs.
For additional information r�f�r to Air Impact �r�nc� Product Saf�ty Information Manual
Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Sp�cifications
Driv�
Mod�ls Styl�
Typ� Siz�
290
Pistol Square 1"
290-EU
Square
290-6-EU Pistol 6" ex-
tended
* K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 47132600 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
Parts and Maint�nanc�
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ing�rsoll Rand Office or Distributor.
16581969_ed3
R�comm�nd�d
Impacts
Torqu� Rang�
p�r
min.
ft-lb (Nm)
150 - 1000
800
(203 - 1356)
150 - 1000
1" 800
(203 - 1356)
Sound L�v�l dB(A)
(ANSI S5.1-1971)
Pow�r
Pr�ssur�
(ISO3744)
104.6 117.6
104.6 117.6
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
11. Grease - through fitting
EN
Vibration (m/s²)
(ISO28927)
L�v�l *K
22.7 2.6
15.8 5.2
EN-1