Advertisement
2. Move the joystick to move the product in that
direction:
D
C
a) Forward operation (A).
b) Right operation (B).
c) Rearward operation (C).
d) Left operation (D).
The vibration starts when you move the joystick.
3. Release the joystick to stop the movement of the
product and the vibration.
System information on the remote control
display
When the remote control starts, this information shows
on the display:
A
C
•
Hour meter for engine operation (A).
•
Software version for the electronic control unit (ECU)
(B).
•
Software version for the receiver (C).
•
Software version for the remote control (D).
During operation, these messages can show on the
display:
Event
Pairing operation
Pairing operation
Pairing operation comple-
ted
16
A
B
Information on the display
"Pairing info"
"Pairing RX-TX..."
"Pairing info"
"Pairing RX-TX- Link OK"
"Pairing ready!"
"Restart system"
Event
®
Bluetooth
®
Bluetooth
connected
®
Bluetooth
fault
Link timeout
Pairing operation failed
Pairing operation failed
B
D
Symbols on the remote control display
The remote control is connected to the
receiver by radio communication.
The battery charges.
The oil pressure is too low. The engine
stops in 30 seconds.
CA: CAN error. Do a check of the
connection between the receiver and the
electronic control unit (ECU).
The remote control is connected to the
receiver by cable.
Information on the display
"Pairing info"
"Pairing RX-TX- Link OK"
"Pairing info"
"Pairing RX-TX- Link ER-
ROR"
"Pairing failed!"
"Restart system"
"Pairing info"
"Pairing RX-TX..."
"Pairing failed!"
"Restart system"
"Pairing info"
"Pairing RX-TX- Link OK"
"Pairing failed!"
"Restart system"
1177 - 001 - 02.04.2020
Advertisement
