Xerox 610E35560 Quick Start Manual page 20

Xerox equipment which has been properly and
regularly serviced and maintained should not have to
undergo additional specific safety tests pursuant to the
1989 Regulation. Customers wishing to complete
safety testing should contact Xerox Limited Technical
Centre (see page B22) for advice prior to any test
implementation.
XEROX equipment should, however, be properly and
regularly serviced and maintained at all times.
QUESTION: What is the Electricity at Work
Regulation?
ANSWER: The Electricity at Work Regulation
1989 came into force in England and Wales on the 1
April 1990. This 1989 Regulation places a duty on all
employers and self-employed persons to ensure
the electrical systems in their premises are
constructed, maintained and operated in such a
manner as to prevent, so far as reasonably
practicable, danger. This includes ensuring that all
electrical products connected to such electrical
systems are safely constructed, maintained and
operated.
QUESTION: Does XEROX Limited comply with
the Electricity at Work Regulation?
ANSWER: The regulation places a duty on all
employers and self-employed persons to ensure
the electrical systems in their premises are, effectively
safe.
The regulation does not impose on, amongst others,
manufacturers or suppliers of such electrical
systems. However, rest assured that all XEROX
equipment which XEROX Limited and its authorized
distributors supplies to customers, conforms with all
the relevant safety legislation and standards.
QUESTION: Is XEROX equipment safe?
ANSWER: All XEROX equipment supplied by
XEROX Limited and their authorized distributors
conforms to all relevant safety legislation and
standards.
Page 20