TP-Link Jetstream Series Installation Manual page 10

100M/1000 M/10Gbps
Model
T1700G-28TQ
T1700X-16TS
TL-SG2210MP
TL-SG2428P
Rear Panel
■
The rear panel is shown as the following figure. Here we take T1600G-28TS as an example.
Figure 1-11 Rear Panel
Kensington Security slot
Kensington Security Slot
Secure the lock (not provided) into the security slot to prevent the device from being stolen.
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground the switch through
the PE (Protecting Earth) cable of AC cord or with Ground Cable. For detailed lightning protection
measures, go to https://www.tp-link.com/support, search the model number of your switch and go to
the product Support web page, refer to the Lightning Protection Guide from the Related Documents:
https://www.tp-link.com/us/configuration-guides/lightning_protection_guide/.
Power Socket
Connect the female connector of the power cord here, and the male connector to the AC power outlet.
Make sure that the voltage of the power supply meets the requirement of the input voltage (100–240 V~
50/60 Hz).
Caution:
You should use the provided power cord.
10/100/1000 Mbps
RJ45 Port RJ45 Port
/
12
/
/
10/100 Mbps RJ45
Port
24 /
/ /
8 /
24 /
Grounding Terminal
JetStream Smart Switch
SFP Port SFP+ Port
/
/
2
4
Power Socket
Introduction
4
4
/
/
07