Land Pride MP10 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Farm Equipment
  5. MP10
  6. Operator's manual

Land Pride MP10 Operator's Manual

Moldboard plows
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Moldboard Plows
MP10 & MP20
Table of Contents
MP10
MP20
Operator's Manual
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French or
Spanish Language, please see your Land Pride dealer.
39500
307-244M
Printed 10/29/18

Advertisement

Table of Contents
loading

Related Manuals for Land Pride MP10

Summary of Contents for Land Pride MP10

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French or Spanish Language, please see your Land Pride dealer. Printed 10/29/18...

  • Page 2: Machine Identification

    Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov MP10 & MP20 Moldboard Plows 307-244M 10/29/18...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. MP10 & MP20 Moldboard Plows 307-244M 10/29/18...

  • Page 5: Important Safety Information

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.

  • Page 6: Tire Safety

     Lower implement to the ground and  Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only.  Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance.
  • Page 7 Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Never carry riders on tractor or structures (ROPS) and seat belt implement.

  • Page 8: Safety Labels

    Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.

  • Page 9: Using This Manual

    The MP10 & MP20 Moldboard Plows are designed and Pride dealer has trained personnel, repair parts, and built by Land Pride for the avid gardener and other food equipment needed to service the implement. plot operators. It is designed to cut, lift, fracture, and...

  • Page 10: Tractor Requirements

    Horsepower rating Have a minimum of two people available during assembly. 2 Wheel drive, MP10 ....20 to 60 hp Make sure all major components and loose Operator’s...

  • Page 11: Support Stand Assembly

    3. Hold linchpin hole vertical and tighten 7/16"-14 hex 39660 nut (#10) to the correct torque for a GR5 bolt. Adjust Draw Pins 4. Repeat steps 2 & 3 for hitch pin (#11). Figure 1-4 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...
  • Page 12 Continue with “Coulter Assembly (Optional)” on 8. Tighten 3/4"-10 hex locknut (#7A) to the correct page 9. torque for GR5 bolt. 9. Tighten hex nut (#10) to the correct torque for GR5 bolt. MP10 & MP20 Moldboard Plows 307-244M 10/29/18...
  • Page 13 Secure bolts with hex locknuts (#1A & #1B). Tighten hex locknut (#1A) to the correct torque. Tighten hex locknut (#1B). Do not bend top link frames (#6 & #9) while tightening locknut (#1B). 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...
  • Page 14 If needed, readjust coulter stop to keep coulter from holes in lower 3-point arms with hitch pins (#1). coming in contact with tractor and/or tractor tires. For detailed instructions, see “Coulter Alignment (Option)” on page 13. MP10 & MP20 Moldboard Plows 307-244M 10/29/18...
  • Page 15 3-point arms off of hitch pins (#1). 13. Replace linchpins (#2) in hitch pins (#1) for safe keeping. 14. Return to the tractor and drive slowly away making sure the tractor and 3-point arms are clear while pulling away. 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...
  • Page 16 21. 7/1 6" Shear Bolt 22. 3/4" Pivot Bolt 39506 23. Top Link Extensions Major Moldboard Plow Features (MP10 Model Shown) Figure 2-1 Moldboard Plow Features 2. Level plow front to back. a. Adjust 3-point center link to level the plow frame...
  • Page 17 GR5 bolt. point and tighten 3/4"-10 hex nuts to the proper torque for GR5 bolts (#7). c. MP20 Model only: Repeat steps a-b above for the rear coulter (rear coulter not shown). 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...
  • Page 18 16 or older. Serious injury or death can result from the inability to read, understand, and follow instructions provided in this manual. MP10 & MP20 Moldboard Plows 307-244M 10/29/18...

  • Page 19: Operating Hints

    Moldboard Plow is 20 mph. DO NOT EXCEED. 3. Be sure to reduce tractor ground speed when turning and leave enough clearance so the plow does not contact obstacles such as buildings, trees, or fences. 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...
  • Page 20 Section 3: Operating Procedures General Operating Instructions With a little practice and a few adjustments, you will soon be achieving the results you want with your Land Pride By now you should have read the Operator’s Manual, MP10 or MP20 plow.

  • Page 21: General Maintenance Information

    Check all bolts and pins after using the plow for several hours and on a regular basis thereafter to ensure they are tight and secured. Replace worn, damaged, or illegible safety labels with new labels from your Land Pride dealer. DANGER To avoid serious injury or death: Always secure equipment with solid, non-concrete supports before working under it.
  • Page 22 802-214C RHSNB 1/2"-13 X 1 1/4" GR5 820-620C PLOW SHIN 307-239H FROG 820-621C 14" MOLDBOARD Installation of Share, Shin, Moldboard, & Coulter (MP10 Model Shown) Figure 4-2 Plow Shares Shins Refer to Figure 4-2: Refer to Figure 4-2: Plow shares (#1) do the most difficult work and demand Shins (#6) receive high wear as they cut the furrow wall the most horsepower to do the work.

  • Page 23: Coulter Blades

    1/2" hex bolt (#6), lock washer (#8B) and hex nut (#7B). Rotate bottom of heel angle brace (#3) to be parallel with bottom of landslide (#2) and tighten nut (#7B) to the correct torque. 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...

  • Page 24: Long Term Storage

    4. Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. They are also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.
  • Page 25 Legend Hours Optional Coulters 1 - Zerk on MP10 2 - Zerks on MP20 Type of Lubrication: Multi-purpose Grease Quantity = 2 to 3 pumps 39501 MP20 Shown 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...

  • Page 26: Section 5: Specifications & Capacities

    (49.5 cm) 14 1/4" 40" (36.2 cm) 44 1/4" (1.12 m) (1.02 m) 42 1/2" (1.08 m) 19 1/2" (49.5 cm) 27 3/4" (70.5 cm) 65 3/4" (1.67 m) 39 1/2" (1.00 m) 39507 MP10 & MP20 Moldboard Plows 307-244M 10/29/18...

  • Page 27: Section 6: Features And Benefits

    Breaks ground ahead of the moldboard so that the plow can pull easier and cuts trash to 14" coulters (Optional) help keep trash from wrapping around and building-up on the plow shank. MP top link extension Allows greater range of adjustment for tractors with short top links. (accessory) 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...
  • Page 28 Plow is not trailing straight. page. Furrow slice falls back. Plowing too deep of a furrow. Reduce plowing depth. Furrow slice is throwing too far. Plow is being pulled too fast. Reduce tractor traveling speed. MP10 & MP20 Moldboard Plows 307-244M 10/29/18...
  • Page 29 Shear bolt shears easily. Plowing too deep. Plow at a shallower depth. Tractor horsepower is too high or using Use a smaller tractor. 4WD to pull the plow. If using 4WD, switch to 2WD. 10/29/18 MP10 & MP20 Moldboard Plows 307-244M...

  • Page 30: Torque Values Chart For Common Bolt Sizes

    = nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. MP10 & MP20 Moldboard Plows 307-244M 10/29/18...

  • Page 31: Warranty

    This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 32 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

This manual is also suitable for:

Mp20

Table of Contents