Table of Contents
Advertisement
Section 4: Maintenance & Lubrication
Long-term Storage
!
CAUTION
To avoid minor or moderate injury:
Keep children and bystanders away from the storage area.
People can accidentally fall into the plow causing serious
bodily injuries.
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1.
Clean off any dirt and grease that may have
accumulated on the plow and moving parts. Scrape
off compacted dirt and then wash the surfaces
thoroughly with a garden hose. Be sure to dry the land
polished surfaces immediately after washing to
minimize oxidation.
2. Inspect for loose, damaged, or worn components
and bolts. Especially check plow shares, shins,
moldboards, landslide, and coulter blades for wear.
Adjust or replace components as needed.
3. Apply a coat of heavy grease or spray on enamel paint
to the land-polished surfaces of the plow to minimize
oxidation and to save time scouring the plow the next
time the plow is put into service.
4. Repaint parts where paint is worn or scratched to
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
Land Pride Touch-up Paint
Part No.
Part Description
821-066C
PAINT ORANGE SPRAY CAN
821-070C
PAINT GP GLOSS BLACK SPRAY CAN
5. Replace all damaged or missing guarding & decals.
6. Lubricate as noted in "Lubrication Points" starting
on page 21.
7.
Store plow on a level surface in a clean, dry place.
Inside storage will reduce oxidation, maintenance
and make for a longer plow life.
8. Follow all unhooking instructions on page 11 when
disconnecting tractor from plow.
20
MP10 & MP20 Moldboard Plows 307-244M
Table of Contents
Ordering Replacement Parts
Land Pride offers equipment in factory standard Orange
with black highlights.
When ordering replacement parts, the suffix number
corresponding to the color must be added at the end of
the part number.
82 . . . . . . . Orange
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
85 . . . . . . . Black
10/29/18
Advertisement
Table of Contents
