Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 1/16/20...
Page 2
Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture.
Page 5
Important Safety Information Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look For The Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a insurance against an accident.
Page 6
Lower implement to the ground and Replace parts on this implement above recommended pressures follow all shutdown procedures with genuine Land Pride parts only. shown in the Operator’s Manual. before leaving the operator’s seat to Do not alter this implement in a way ...
Page 7
Use Safety Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and tractor Never carry riders or use structures (ROPS) and seat belt self-propelled equipment can to lift or transport individuals.
Page 8
Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 1/16/20...
Page 10
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Page 11
Table of Contents Important Safety Information 30386 818-714C Danger: Crushing Hazard 30388 818-714C Danger: Crushing Hazard 30386 818-388C Important - Valve must be open 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 12
The HRS3025 Hydraulic Reservoir System is designed required. Your Land Pride dealer has trained personnel, and built by Land Pride for category I & II three-point repair parts, and equipment needed to service the hitches on the back of tractors with 540 rpm power take- reservoir.
Page 13
Refer to page 38 to determine correct torque values when tightening hardware. CAUTION Handle pump carefully. Pump weight is approximately 50 lbs. 35632 and can be damaged or cause bodily injury if dropped. Parking Stand Installation Figure 1-2 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 14
11. Attach suction hose (#16) to elbow (#14) with worm drive clamp (#4). Make sure suction hose passes through slot “C” and tighten worm drive clamp (#4). 12. Tighten elbow (#15) to hydraulic pump (#11). HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 15
(#8). Tighten nuts to the correct torque. Reservoir” on page 20. 23. Attach mounting bracket (#1) to reservoir tank with 3/8"-16 x 1" GR5 cap screws (#5), flat washers (#15), 35626 No Valve No Oil Cooler Assembly Figure 1-4 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 16
(#5), spring lock washers (#4), and hex head nuts (#3). Draw nuts up snug, do not tighten until after a hydraulic hose is attached to port (#8) and filter base (not shown). 30395 Oil Cooler Assembly Figure 1-5 HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 17
22. Tighten elbow (#15) to tee (#16). 10. Screw tee (#21) to adapter (#20) until snug. 23. Tighten oil cooler bolts (#2) to the correct torque. 30390 No Valve With Oil Cooler Assembly Figure 1-6 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 18
Screw 1/4" x 9 1/2" lg. hydraulic hose (#21) to elbow Screw filter (#16) and shoulder ring (#17) onto filter fitting (#20). Do not tighten. 30391 Manual Valve With Oil Cooler Assembly Figure 1-7 HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 19
(#25) to secure wires to solenoids. 26. Tighten elbow (#12) to spin-on filter head (#17). 27. Tighten oil cooler bolts (#2) to the correct torque. 30392 Solenoid Valve With Oil Cooler Assembly Figure 1-9 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 20
Refer to “Lubrication weight requirements and maximum weight limitations. Points” on page 34. NOTE: Land Pride’s Quick Hitch can be attached to Refer to Figure 2-1: the tractor to provide quick and easy 3-point hook- The driveline is coupled to the tractor power take-off shaft up and detachment.
If needed, shut tractor off and move or remove 8. The tractor’s lower 3-point arms should be adjusted drawbar to prevent driveline damage. for lateral float. Please consult your tractor’s manual. 9. Continue with “Check Driveline Interference” on page 19. 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 22
18. Otherwise continue with step 8. 2. Assemble the two driveline profiles together with just 1/2 overlapping of the profile tubes as shown. Once assembled, measure and record maximum allowable length here. ________ HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 23
3-point lift to indicate the maximum lift height. 10. Shut hut tractor down using “Tractor Shutdown Procedure” on page 16. 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 24
Pull on the couplers to make sure they are securely locked. 3. Secure hydraulic hoses along the route with ties provided by the customer. Make sure all kinks, twists, and pinch points are removed. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 25
(#5) until tight. 6. Secure case drain line with ties provided by the customer. Make sure all kinks, twists, and pinch points are removed. 35631 Hydraulic Hook-up to Manual or Solenoid Valve Figure 2-10 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 26
Secure wiring harness with ties. Make sure harness will not become pinched along the route. a. Connect red terminal ring to the 12 volt positive post (+) on the battery. b. Connect black terminal ring to ground. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 27
Attach black and green weather proof terminal to the oil cooler. If an oil cooler is not included, wrap terminal with electrical tape to protect it. 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 28
See your nearest Land Pride dealer should you want to change your valve set-up. No Valve No Cooler Option 316-250A No Valve &...
Page 29
It also opens when pressure becomes too high dumping fluid back into the tank. 35620 Solenoid Valve Option With Cooler Figure 3-4 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 30
Slow Moving Vehicle Sign (Accessory) Refer to Figure 3-8: Land Pride offers the slow moving vehicle sign (#1) as an accessory should your tractor not be equipped with a removable sign that fits Land Pride’s SMV mounting socket (#4). Also, mounting components (#2, #3, & #4)
“C” or “D” as needed. Make sure hitch pins are in 2. Rotate level 90 degrees. Manually adjust the length the same holes on all four legs. of the top center 3-point link to level the Hydraulic Reservoir from front to rear. 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 32
Do not use a power take-off adapter. The adapter will increase strain on the tractor’s power take-off shaft causing possible damage to shaft and driveline. It will also defeat the purpose of the tractor’s power take-off shield. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 33
Avoid catching hydraulic hoses on brush, posts, tree limbs, the attachment is observed. and other protrusions that could damage and/or break them. The HRS3025 with 3000 psi at 25 gpm and 35 gallon self Refer to Figure 5-1: contained hydraulic reservoir is designed to provide If the tractor’s slow moving vehicle sign (SMV) (#1) is...
8. Collapse the driveline by pushing it towards the reservoir. 9. Support the collapsed driveline off the ground to keep dirt away from the pull collars and bearings. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 35
Replace worn, damaged, or illegible safety labels by filter element at the prescribed intervals. These simple obtaining new labels from your Land Pride dealer. maintenances will go a long way to prevent occurrence of Periodically, disengage power take-off, stop tractor, place control valve and hydraulic cylinder problems.
Page 36
Tighten plug. 4. Fill reservoir with 35 gallons of Mobil Fluid 424. See Important Note on left side of this page. 5. When full, replace fill cap (#7) and tighten. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 37
8. Follow all unhooking instructions on this page when disconnecting tractor from the Hydraulic Reservoir System. 9. Repaint parts where paint is worn or scratched to prevent rust. 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 38
Unbolt speed pump mount from reservoir frame Type of lubrication: 80-90W EP gear lube and rotate gearbox down to check oil level. 30861 Quantity = Fill until oil begins to flow out of plug hole. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 39
Option 3/4" body size (Attach to hoses with 1 5/16" threads) Case drain kit Option Complete with 3/4" MORB x 9/16" MJIC elbow, 23'-9" of 3/8" hydraulic hose, and one 3/8" body flat face low spill quick coupler male tip 30399 1/16/20 HRS3025 Hydraulic Reservoir System 316-271M...
Page 40
Oil cooler Included with hand valve & solenoid valve options. Optional with no valve option. Provides for easy installation and removal from the tractor and clean and convenient long Integral storage stands term storage. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 41
One or more hydraulic hoses are twisted, Locate twist, kink, or pinch points and kinked, or pinched. remove. Add a Land Pride oil cooling system to the Reservoir does not have an oil cooler. reservoir. Hydraulic fluid is operating at The power on/off red toggle switch at the too high a temperature.
Page 42
= nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. HRS3025 Hydraulic Reservoir System 316-271M 1/16/20...
Page 43
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.