Subscribe to Our Youtube Channel
Related Manuals for Road Armor Stealth 4191 Series
Summary of Contents for Road Armor Stealth 4191 Series
- Page 1 INSTALL INSTRUCTIONS RAM 1500 Front Stealth Bumper (Including REBEL) Product : 4191XFXX Application : 2019-2020 Ram 1500 Application : 2019 Ram REBEL Page ( 1 of 5)
- Page 2 • Road Armor will not be responsible for the cost of coating your unit if any problems with fit or finish are not SAFETY FIRST! • FOLLOW ALL INSTRUCTIONS, YOUR SAFETY AND THE SAFETY OF OTHERS IS MOST IMPORTANT.
- Page 3 INSTALL INSTRUCTIONS Remove 5 - bolts from inner fender liner / bumper in each fender well. Remove & unplug wiring harness from driver side frame rail. Remove three nuts from each frame horn. Remove factory bumper from frame horn. Remove four nuts and electronic spoiler. Loosen two bolts from each tow hook.
- Page 4 INSTALL INSTRUCTIONS Place the bolt on bracket to the frame horn and loosely secure using the 1/2” hex head bolts and corresponding flat washers, lock washers, and nuts. Attach the second bolt on bracket to the front tow hook bolt and connect to the first bolt on bracket with 1/2”...
- Page 5 INSTALL INSTRUCTIONS With assistance, install the bumper onto the truck and loosely secure the bumper to allow adjustment. Adjust the bumper front/back and tighten the tow hook bolt and the 1/2” bolt tabs connecting the 2 bolt on brackets. Adjust the bumper left/right and up/down and fully tighten the 6 bolt tabs connecting the bumper to the bolt on brackets.
Need help?
Do you have a question about the Stealth 4191 Series and is the answer not in the manual?
Questions and answers