Reset To Factory Mode; Inventory Mode - Inateck BCST-50 User Manual

English
Note：
1). This user manual is not applicable to the BCST-50 whose SN starts with digit 8.
Please download the corresponding manual if you have such barcode scanners at
hand.
2). The factory default setting is indicated by an asterisk ʻ*ʼ.

1. Reset to Factory Mode

1.1 If some function is set by a 1D barcode, you can reset it to factory mode by
scanning the barcode below.
1.2 If some function is set by a two-dimensional code, you can reset it to factory
mode by scanning the two-dimensional code below.

2. Inventory Mode

If you want to keep the barcodes in the buffer of Inateck BCST-50 for multiple
uploading, you can choose inventory mode. In inventory mode, Inateck BCST-50 will
count the number of the barcodes automatically. Users may use inventory mode
to keep scanned barcodes in the buffer of Inateck BCST-50, and upload them to
computer in batches. Under inventory mode, users are not restricted to the time
and location when upload data. Of course, history data can be cleared in buffer after
uploading. More details about inventory mode are as below.
2.1 Scan the ʻEnter Inventory Modeʼ barcode to enter Inventory Mode.
2.2 Scan the ʻData Upload (for Inventory Mode only)ʼbarcode to upload data from
buffer (for Inventory Mode only)
Reset to Factory Mode
Reset to Factory Mode
Enter Inventory Mode
Data Upload (for Inventory Mode only)
,
1