Rigid Industries E Series Installation Instructions

Fits (1) 38" roof mount for yamaha yxz

Hide thumbs Also See for E Series:

Yamaha

2016-2017 Yamaha

Roof Mount Installation Instructions

Thank you for purchasing Rigid Industries® products for your Yamaha®. Installation is fairly simple

with the right tools and good mechanical abilities. If you are not confident in your mechanical

skills, please seek the help of a professional to perform the installation. Please read through all

of these instructions and tips before proceeding with the installation.

It is strongly recommended that this product be installed by a professional.

Always disconnect any power sources connected to your

Remove (2) factory bolts under roof and re-install bolts through Rigid Industries roof mount.

See Figure 1.

Figure 1

Fits (1) 38" E-Series®

*Lights Sold Separately

vehicle before servicing fuses or electrical systems.

yxz

kit includes

(2) Mounts #46575

Figure 1.1

Table of Contents

Do you have a question about the E Series and is the answer not in the manual?

Page 1 (2) Mounts #46575 Important Thank you for purchasing Rigid Industries® products for your Yamaha®. Installation is fairly simple with the right tools and good mechanical abilities. If you are not confident in your mechanical skills, please seek the help of a professional to perform the installation. Please read through all of these instructions and tips before proceeding with the installation.
Page 2 Repeat Step 1 for remaining side. step 3 Install Rigid Industries light using hardware provided with the light. See Figure 3. Wiring: Wire your lights according to the instructions included with the light. Take care to avoid any heat sources and sharp or abrasive surfaces.

46575