Starting The Pc Runtime - Siemens SIMATIC S7-1200 Manual

4 Installation and Commissioning
No.

3.
If necessary, activate the option
"Overwrite all".

Click the "Load" button.

4.
Depending on the operator panel settings,
you may have to trigger the transfer by
clicking the "Transfer" button in the Start
Center of the KTP900 Basic.

Starting the PC runtime

If you want to use the PG/PC as the operator panel, start the PC runtime as
follows:
Table 4-11
No.

Select the operator panel folder "PID_HMI
1.
[KTP900 Basic PN]".

Click the "Start simulation" button.
Controlling several fans (ebm-papst) via Modbus RTU
Entry ID: 109476801, V2.0,
Action
Action
09/2018
Remarks
Remarks
36