Table of Contents
Advertisement
Settings
Setting USB power jumper
The power supply of the USB port is set with the jumper.
The USB port is only supplied with power when switched on.
Position 1 - 2
The USB port is always supplied with power (default setting).
Position 2 -3
Recovering System BIOS - switch 2
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service center).
On
The System BIOS executes from standard floppy drive A: and the inserted "Flash-
BIOS-Diskette" restores the System BIOS on the system board.
Off
Normal operation (default setting).
Write protection for floppy disks - switch 3
Switch 3 is used to define whether floppy disks can be written or deleted in the standard floppy disk
drive. To write and delete floppy disks, the write-protection in BIOS Setup must be disabled (in menu
Security, the field Diskette Write must be set to Enabled).
The standard floppy disk drive is write-protected.
On
Off
Read, write and delete floppy disks is possible (default setting).
10 - English
U41126-J-Z156-1-74
Advertisement
Table of Contents
