Advertisement
06
Portable concentrators. Equipment guide.
Inogen One
®
G3 filters and connections
Particle filters
Particle filters keep out dust, dirt and
large particles. They must be kept in place
during concentrator operation to keep input
air clean. Note: depending on device version,
the intake filters may be at the top or bottom
of the device. Please see the picture opposite.
Cannula fitting
Your high-flow nasal cannula connects
to this outlet for oxygen delivery.
Power input
Located at the top of the device to one side,
this is the connection for external power from
the AC power supply or DC power cable.
How to use the Inogen One
Important: Please read the important safeguards in the
"Dos and don'ts" section and observe all warnings and
cautions in this guide. Follow all operating instructions.
If you have any questions or concerns please call BOC
immediately on 0800 136 603.
1. Device location
Place your Inogen One
®
G3 device in a
wellventilated location so the intake and
exhaust vents are clear and unobstructed
(the position of these can vary as pictured
alongside). The device should also be located
so auditory alarms can be heard.
2. Filters
Ensure both intake particle filters
(those with the blue plastic surround)
are clean and correctly installed.
3. Battery
Install the Inogen One
®
G3 battery by sliding
it into place at the bottom of the device
until an audible click is heard and the latch
securing the battery to the device returns to
the upper position.
Portable concentrators. Equipment guide.
®
G3
Exhaust
Intake
Intake
Exhaust
07
Advertisement
