Advertisement
04
Portable concentrators. Equipment guide.
Inogen One
®
G3 device overview
Display
Flow control
ON/OFF button
Press button once to turn the device "ON".Press and
hold for one second to turn the device "OFF".
Audible alarm button
Pressing this button will toggle the Inogen One
breath detection audible alert on and off. See page
22 for more information.
Flow control buttons
Use the flow control buttons (– or +) to change the
setting shown on the display. Depending on device
version, there are four or five settings
(1 to 4, or 1 to 5 pulsed).
Display backlight button
Push this button to turn on the display backlight for
better illumination of the device settings. The back-
light turns off again automatically after 10 seconds.
Breath detection light
Display back
light button
ON/OFF button
Audible alarm button
Alert/alarm light
®
G3's
Display
This screen displays information regarding
flow setting, power status, battery life and
errors. In the picture to the right, the device
is at setting 4, with one hour and 26 minutes
of battery life remaining at this setting.
Indicator lights
A red light indicates a change in operating
status or a condition that may need a priority
response. A flashing light is a higher priority
than a solid light.
Audible signals
An audible signal (beep) indicates a change
in operating status or a condition that
may need a priority response (alarm).
More frequent beeps indicate higher
priority
conditions.
Portable concentrators. Equipment guide.
05
Advertisement
