Advertisement
Use these schematics to build custom cables at your own risk. Miswired cables
can cause serious damage to the camera, which is not covered under warranty.
Vision Research recommends only using cables supplied by Vision Research.
PHANTOM T-SERIES BNC CONNECTORS
BNC
POWER CONNECTOR (MALE) (PRIMARY & BACKUP)
Cable 3-pin Fischer Part #SS 104Z040-80
C O N N E C T O R P I N - O U T
Vision Research, Inc. | Phantom T-Series Camer a Manual
NOMENCLATURE/FUNCTION
Dedicated I/O - Trigger-In / active-low isolated input.
1 Trigger
Can be activated by a switch to ground. The trigger pulse
needs to be at least three microseconds long.
Dedicated I/O - Timecode In / can accept IRIG-B and SMPTE
2 TC In
Programmable I/O ports have a +5V maximum threshold,
Program-
input is also compatible with TTL levels and must be properly
mable I/O
terminated (50-ohms). Isolated collector output with 1k pull-up.
SDI
75-ohms. Outputs standard HD-SDI signals up to 1080 p60
PIN
1
2
3
standards.
NOMENCLATURE/FUNCTION
+20–28VDC
CHGND / Chassis Ground
GND / Power Ground
Advertisement
