3. SERVICING THE PROCUT BELT CUTTER
Disassembly
Step 1:
Pull out the detent pin as far as it will go and open the belt cutter.
Step 2:
Screw threaded rod clockwise to lower the blade. Slide the blade
sideways off the round end of the threaded rod.
Step 3:
Continue to screw the threaded rod clockwise and fully remove it.
Document No: 720900-1
Issue Date: 2018-Sep-20
Revision: C
Page 7 of 13
This document and all copies are the property of Safeworks. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.