Advertisement
Step 2:
Orient Shear Ram 2 so that the cutout in the bolt hole reinforcement
faces DOWN. Align the holes of Shear Ram 2 with the holes on Shear
Ram 1 and the Handle as shown below. Insert the two long bolts with
a washer through Shear Ram 2, each Shear Ram Holder, Shear Ram 1,
and the Handle. Secure with a washer and locknut using two 16 mm
wrenches.
Screw M10x60
Washer 10 mm
Document No: 720900-1
This document and all copies are the property of Safeworks. All dimensions and data are indicative only.
Shear Ram 2
Cutout in bolt hole
reinforcement must
face DOWN
Issue Date: 2018-Sep-20
The user must ensure that the equipment complies with local rules and regulations.
Lock Nut M10
Revision: C
Page 10 of 13
Advertisement
